Abstract:Abstract The complex aero-thermal coupling between fluid and solid regions within high-pressure turbines makes it important to perform multidisciplinary design optimization of high-pressure turbine blades. However, most published works failed to consider the correlations between blade profiles and cooling structures that could best compromise the aerodynamic and thermal performance of high-pressure turbine blades, and the related optimization problems were so far limited to single- or bi-objective ones. The critical drawbacks of these available studies are mainly due to the reduced accuracies of the adopted methods when dealing with large numbers of design variables and objectives. To tackle these difficulties, a dimension reduction-based multidisciplinary design optimization method is proposed and validated through an aero-thermal design optimization of the NASA-C3X vane with a total of 39 design variables and five performance objectives. The main novelties of this proposed method lie in a hybrid dimension reduction of design space by means of the proper orthogonal decomposition and global sensitivity analysis methods, as well as the integration of the ensemble surrogate model and the reference vector evolutionary algorithm for optimal solutions. The results show that the prediction accuracy of the ensemble surrogate model for each performance objective is enhanced, even though the dimensionalities of design space are reduced. Complicated compromises exist among the five performance objectives under consideration. For NASA-C3X vane, the optimal design helps reduce irreversible flow losses especially wake losses while reducing the volumes with high-temperature and high-temperature gradient near the trailing edge is mainly responsible for the reduced irreversible losses due to heat transfer. The outcomes of this work are particularly relevant for the advanced design optimization methods for high pressure turbines.

Design of high Reynolds number compressor airfoil with early transition for heavy-duty gas turbine

Optimization Design of a Turbine Blade to Reduce Secondary Flow Loss Using a Viscous Adjoint Method

Optimization design of multi-section airfoils for heavy-duty gas turbine compressor

Optimization Design of Aspect Ratio and Solidity of a Heavy-Duty Gas Turbine Transonic Compressor Rotor

Optimization Design on Ground Based Heavy Duty Gas Turbine Compressor Blades

Aerodynamic stability optimization of controlled diffusion airfoil

Fast Multi-Objective Optimization Design of Gas Turbine L-inlet Duct

Utilizing artificial intelligence to develop an advanced compressor airfoil family for industrial, aero-derivative, and heavy-duty gas turbines

A Novel Airfoil Design Method and its Application to the Optimization Design of a 3-Stage Transonic Compressor

Design Optimization Of Transonic Compressor Rotor Using Cfd And Genetic Algorithm

Optimized Design of Axial Compressor Blades

Development and Prospect of Controlled Diffusion Airfoils for Multistage Compressor Part I:Design and Development of Controlled Diffusion Airfoils

An Experience-Independent Inverse Design Optimization Method of Compressor Cascade Airfoil

A new optimization approach to improve the overall performance of thick wind turbine airfoils

Transonic Compressor Blade Optimization Integrated with Circumferential Groove Casing Treatment

A cooled turbine blade design and optimization method considering the cooling structure influence

A Method for the Optimized Design of Centrifugal Compressor Blades

Design optimization of transonic compressor stage using CFD and response surface model

Development of a Multi-Objective Preliminary Design Optimization Approach for Axial Flow Compressors

Aerodynamic Design Optimization of an Axial Flow Compressor Stator Using Parameterized Free-Form Deformation

A Dimension Reduction-Based Multidisciplinary Design Optimization Method for High Pressure Turbine Blades