Abstract:Abstract. Lidars have become a valuable technology to assess the wind resource at hub height of modern wind turbines. However, because of the assumption of homogeneous flow in their wind vector reconstruction algorithms, common wind profile Doppler lidars suffer from errors at complex terrain sites. This study analyses the impact of the five main influencing factors for lidar measurement errors in complex terrain, i.e. orographic complexity, measurement height, surface roughness and forest, atmospheric stability, and half-cone opening angle, in a non-dimensional, model-based parameter study. In a novel approach, the lidar error ε is split up into a part εc, caused by flow curvature at the measurement points of the lidar, and a part εs, caused by the local speed-up effects between the measurement points. This approach allows for a systematic and complete interpretation of the influence of the half-cone opening angle φ of the lidar on the total lidar error ε. It also provides information about the uncertainty in simple lidar error estimations that are based on inflow and outflow angles at the measurement points. The model-based parameter study is limited to two-dimensional Gaussian hills with hill height H and hill half-width L. H/L and z/L, with z being the measurement height, are identified as the main scaling factors for the lidar error. Three flow models of different complexity are used to estimate the lidar errors. The outcome of the study provides various findings that enable an assessment of the applicability of these flow models. The study clearly shows that orographic complexity, roughness and forest characteristics, and atmospheric stability have a significant influence on lidar error estimation. Based on the error separation approach it furthermore allows for an in-depth analysis of the influence of reduced half-cone opening angles, explaining contradiction in the previously available literature. The choice and parameterization of flow models and the design of methods for lidar error estimation are found to be essential to achieve accurate results. The use of a Reynolds-averaged Navier–Stokes (RANS) computational fluid dynamics (CFD) model in conjunction with an appropriate forest model is highly recommended for lidar error estimations in complex terrain since forest (and roughness) tends to reduce the lidar error. If atmospheric stability variation at a measurement site plays a vital role, it should also be considered in the modelling. When planning a measurement campaign, an accurate estimation of the predicted lidar error should be carried out in advance to choose a reasonable measurement location. This will decrease measurement uncertainties and maximize the value of the measurement data.

Motion error analysis of the 3D coordinates of airborne lidar for typical terrains

Impacts of control errors and measurement errors in airborne LiDAR on laser point cloud

Analyzing and Modeling on Coordinate Conversion Errors of Airborne Lidar Detection Data

Modeling and Tracing of Errors Caused by Coordinate Conversions with Dopplerlet Transform Analysis in Airborne Lidar System

Influence of Laser Footprint Deviation Causing by Motion Error of Airborne LiDAR

Impact analysis of random measurement errors on airborne laser scanning accuracy

Simulation on Impact of Random Attitude Measurement Errors on Point Cloud and 3D Image of ALS

Impact Of Attitude Measurement Errors On Laser Footprints Positioning Accuracy

The five main influencing factors for lidar errors in complex terrain

Error modeling and analysis on wind speed and direction for 2 mu m space based coherent Doppler LIDAR

Algorithm of Geometry Correction for Airborne 3D Scanning Laser Radar

A Theoretical and Empirical Error Analysis of Mobile 3d Data Acquisition System

Motion Error Analysis And Compensation For Airborne Formation Flying Insar

The Influence of the Status of Aircraft on Detection Accuracy of Airborne Scanning Lidar

3D Lidar Mapping Relative Accuracy Automatic Evaluation Algorithm

Influence of Aircraft Attitude Fluctuations on Point Cloud Density and Digital Surface Model (DSM) Accuracy from Airborne LiDAR

Analysis of Internal Angle Error of UAV LiDAR Based on Rotating Mirror Scanning

A New Method of Motion Error Extraction from Radar Raw Data for SAR Motion Compensation

Point Cloud Uncertainty Analysis for Laser Radar Measurement System Based on Error Ellipsoid Model

Elevation error analysis of spaceborne laser altimeter for earth observation

Error Analysis of a Kind of 3D Laser Ball Bar