Abstract:In this paper, by constructing a 3-DOF (Degrees of freedom) laser interferometer on each displacement axis of motion, the main errors during the coordinate measuring machines (CMM) motion are dynamically monitored. The 3-DOF laser interferometer is composed of three-beam dual-frequency laser interferometers, and each dual-frequency laser interferometer obtains the reflection signal through a corner cube reflector. By determining the position parameters of the three corner cube reflectors and three sets of feedback signals, the 3-DOF laser interferometer can calculate the three parameters, i.e., the axial displacement and the lateral pitch and yaw angles. The device is installed on each motion axis of the CMM to monitor 9 major errors during the whole motion system. Laser signals are used to track position information by establishing the rigid body transformation relationship. Therefore, the 9 errors can be updated in real time through the monitoring system to replace the calibration results to calculate the probe position. The position error of the CMM probe caused by the dynamic error is simulated. Monte Carlo method is employed to obtain the error situation and monitor the residual error distribution throughout the measurement movement process. The errors can be corrected immediately without recalibrating the CMM error parameters especially when the dynamic error changes significantly. In addition, environmental errors are also introduced in the model to analyze the impact on the accuracy of position monitoring. The method proposed can reduce the position monitoring error within 0.1 mu m. Using this method, the error source of a dynamic error monitoring system can be designed in a simulated environment, which can be used as the basis for the design of the dynamic error monitoring system.

Error Analysis of a Kind of 3D Laser Ball Bar

Four Degree-Of-Freedom Geometric Error Measurement System with Common-Path Compensation for Laser Beam Drift

A Novel Laser Tracking Testbed For Robot Trajectory Errors

Error Compensation and Accuracy Analysis of Laser Measurement System Based on Laser-Beam Calibration

A 3D Passive Laser Tracker for Accuracy Calibration of Robots

Geometrical Error Correction Research in High Precision 2D Laser Measuring Instrument

A Simple Integrated Geometrical Error Model for Laser Tracer

Error Analysis and Compensation of Galvanometer Laser Scanning Measurement System

Measuring geometrical errors of linear axis of machine tools based on the laser tracker

Modeling And Simulation Of Dynamic Errors In A Coordinate Measuring Machine With 3-Dof Laser Interferometer

Study on Calibration and Error Compensation of Laser Scanning System

Indirect Measurement of Machine Tool Motion Axis Error with Single Laser Tracker

Error Detection Technology for Calibrating Precision of Non-Contact Coordinate Measuring Machine

Three Laser Beams Monitoring Method For Linear Movement Error Of Datum Cylindricity Measuring Instrument

Error Analysis and Compensation of a Laser Measurement System for Simultaneously Measuring Five-Degree-of-Freedom Error Motions of Linear Stages

Calibration Method of a Laser Beam Based on Discrete Point Interpolation for 3D Precision Measurement.

Analysis of Factors Affecting Measurement Accuracy and Establishment of an Optimal Measurement Strategy of a Laser Displacement Sensor.

Pose calibration of line structured light probe based on ball bar target in cylindrical coordinate measuring machines

Error Analysis and Accuracy Assurance of Two-Dimensional Rotatory Axes for Laser Tracing Measurement System

The Error Model and Experiment of Measuring Angular Position Error Based on Laser Collimation

Space Error Measurement & Analysis of CNC Machine Tools with Ballbar