Abstract:Abstract Metal-dielectric-metal (MIM) waveguide coupling systems based on surface plasmon polaritons (SPPs) are designed and studied. The finite element method is used to simulate the transmission spectra of structures in the whole simulation process. One waveguide coupling system consists of an inverted T-shaped cavity with defect (ITD) and a waveguide with a metal wall. The filter band appears in the transmission spectrum due to the opposite direction of two Fano resonances. The filter band width and the filtering range can be tuned effectively by changing the structure parameters. In this system, the center frequency and bandwidth of the filter band are 1330 nm and 114 nm, respectively. The insertion loss and reflection loss are −1.41 dB and −16.89 dB, respectively. The optimization is carried out on the basis of the first system in order to improve the filtering performance. Optimized waveguide coupling system contains an ITD and a waveguide with a slot cavity. Electromagnetically induced transparency (EIT) and Fano resonance exist simultaneously, and the filter band is induced in the transmission spectrum. In this system, the center frequency and bandwidth of the filter band are 1412 nm and 120 nm, respectively. The insertion loss and reflection loss are −0.50 dB and −37.32 dB, respectively. EIT and Fano resonance can not only be regulated independently, but also be regulated simultaneously by changing the structural parameters. And the intensity of EIT and the width of the filter band can be manipulated with changes of the structural parameters. The transmission response of SPPs propagating in the structure can be adjusted dynamically. Moreover, these novel SPPs optical waveguide structures have good filtering efficiency and can meet different filtering needs. These results show that the proposed systems are promising for filter, slow light device and photonic device integration applications.

Narrow-Band Filter of Surface Plasmon Based on Dual-Section Metal-Insulator-Metal Structure

Narrow band filters in both transmission and reflection with metal/dielectric thin films

Non-polarized and Ultra-Narrow Band Filter in MIR Based on Multilayer Metasurface

Omnidirectional Narrow Bandpass Filter Based on Metal-Dielectric Thin Films

Plasmonic Filter with Sub-Waveguide Coupled to Vertical Rectangular Resonator Structure

Surface Plasmon Polaritons Filter with Transmission Optimized Based on the Multimode Interference Coupled Mode Theory

Narrow-band, low-sideband plasmonic filter of asymmetric bi-layer metallic nanoslit arrays

Plasmonic Narrowband Filter Based on an Equilateral Triangular Resonator with a Silver Bar

Band-Stop Filter Based on Metal-Insulator-Metal Waveguide with Asymmetric Circular Resonant Cavities

Tunable ultra-narrow band band-stop filter based on metal-insulator-metal plasmonic waveguide with square resonator

Plasmonic band-stop MIM waveguide filter based on bilateral asymmetric equilateral triangular ring

Free-standing Plasmonic Metal-Dielectric-metal Bandpass Filter with High Transmission Efficiency

Band Rejection Filter Based on A Composite Spoof Surface Plasmon Periodic Structure

Band-stop filter based on tunable Fano resonance and electromagnetically induced transparency in metal-dielectric-metal waveguide coupling systems

Ultra-efficient Diamond Plasmonic Band-Stop Filter with Enhanced Effect

Surface Plasmon Polariton Based Band-Pass And Stop-Band Filters In Symmetric Double Ring Resonators

Multiple ultra-narrow band-stop filters based on MIM plasmonic waveguide with nanoring cavities

A Band-Stop Plasmonic Filter Based on Spoof Surface Plasmon Polaritons

Systematical research on the characteristics of a vertical coupled Fabry-Perot plasmonic filter

Transmission Optimization and Mode Increasing Effect of Filters Based on Lorentz-Type Multimode Interference Coupled Mode Theory

Planar narrow-band-pass filter based on Si resonant metasurface