Abstract:Abstract Metal-dielectric-metal (MIM) waveguide coupling systems based on surface plasmon polaritons (SPPs) are designed and studied. The finite element method is used to simulate the transmission spectra of structures in the whole simulation process. One waveguide coupling system consists of an inverted T-shaped cavity with defect (ITD) and a waveguide with a metal wall. The filter band appears in the transmission spectrum due to the opposite direction of two Fano resonances. The filter band width and the filtering range can be tuned effectively by changing the structure parameters. In this system, the center frequency and bandwidth of the filter band are 1330 nm and 114 nm, respectively. The insertion loss and reflection loss are −1.41 dB and −16.89 dB, respectively. The optimization is carried out on the basis of the first system in order to improve the filtering performance. Optimized waveguide coupling system contains an ITD and a waveguide with a slot cavity. Electromagnetically induced transparency (EIT) and Fano resonance exist simultaneously, and the filter band is induced in the transmission spectrum. In this system, the center frequency and bandwidth of the filter band are 1412 nm and 120 nm, respectively. The insertion loss and reflection loss are −0.50 dB and −37.32 dB, respectively. EIT and Fano resonance can not only be regulated independently, but also be regulated simultaneously by changing the structural parameters. And the intensity of EIT and the width of the filter band can be manipulated with changes of the structural parameters. The transmission response of SPPs propagating in the structure can be adjusted dynamically. Moreover, these novel SPPs optical waveguide structures have good filtering efficiency and can meet different filtering needs. These results show that the proposed systems are promising for filter, slow light device and photonic device integration applications.

Plasmonic band-stop MIM waveguide filter based on bilateral asymmetric equilateral triangular ring

Tunable ultra-narrow band band-stop filter based on metal-insulator-metal plasmonic waveguide with square resonator

Plasmonic Narrowband Filter Based on an Equilateral Triangular Resonator with a Silver Bar

Bifunctional MIM device with narrowband filtering and high-performance sensing

Band-stop filter based on tunable Fano resonance and electromagnetically induced transparency in metal-dielectric-metal waveguide coupling systems

Narrow band filters in both transmission and reflection with metal/dielectric thin films

Band-Stop Filter Based on Metal-Insulator-Metal Waveguide with Asymmetric Circular Resonant Cavities

Plasmonic Filter with Sub-Waveguide Coupled to Vertical Rectangular Resonator Structure

Investigation of the transmission properties of a plasmonic MIM waveguide coupled with two ring resonators

Non-polarized and Ultra-Narrow Band Filter in MIR Based on Multilayer Metasurface

Multiple ultra-narrow band-stop filters based on MIM plasmonic waveguide with nanoring cavities

Surface Plasmon Polariton Based Band-Pass And Stop-Band Filters In Symmetric Double Ring Resonators

A Triangular Shaped Channel Mim Waveguide Filter

Tuning Bandgap Of A Double-Tooth-Shaped Mim Waveguide Filter By Control Widths Of The Teeth

Design of Nanorod-Embedded Bandstop MIM Waveguide Filters with High Filtering Efficiency and Sensitivity

Ultra-efficient Diamond Plasmonic Band-Stop Filter with Enhanced Effect

Tunable Optical Filters and Multichannel Switches Based on Mim Plasmonic Nanodisk Resonators Inset A Silver Bar

Surface Plasmon Polaritons Filter with Transmission Optimized Based on the Multimode Interference Coupled Mode Theory

Tunable Fano Resonance in Asymmetric MIM Waveguide Structure

Submicrometer Radius and Highly Confined Plasmonic Ring Resonator Filters Based on Hybrid Metal-Oxide-semiconductor Waveguide.

An Ultra-High Efficient Plasmon Waveguide Filter with Enhanced Filtering Effect