Abstract:The characteristic microstructure of Sm(Co,Fe,Cu,Zr)$_z$ alloys with SmCo$_5$ cell walls in Sm$_2$Co$_{17}$ cells, all intersected by Zr-rich platelets, makes them some of the best performing high-temperature permanent magnets. Plentiful research has been performed to tailor the microstructure at the nanoscale, but due to its complexity many questions remain unanswered about the effect of the individual phases on the magnetic performance at different temperatures. Here, we explore this mechanism effect for three different Sm(Co,Fe,Cu,Zr)$_z$ alloys by deploying high-resolution magnetic imaging via in-situ transmission electron microscopy and three-dimensional chemical analysis using atom probe tomography. We show that their microstructures differ in terms of SmCo$_5$ cell-wall and Z-phase size and density, as well as the Cu concentration in the cell walls, and demonstrate how these features influence the magnetic domain size and density and thus form different magnetic textures. Moreover, we illustrate that the dominant coercivity mechanism at room temperature is domain-wall pinning and show that magnets with a denser cell-wall network, a steeper Cu gradient across the cell-wall boundary, and thinner Z-phase platelets have a higher coercivity. We also show that the coercivity mechanism at high temperatures is domain-wall nucleation at the cell walls. Increasing the Cu concentration inside the cell walls decreases the transition temperature between pinning and nucleation, significantly decreasing the coercivity with increasing temperature. We therefore provide a detailed explanation of how the microstructure on the atomic to nanoscale directly affects the magnetic performance and provide detailed guidelines for an improved design of Sm(Co,Fe,Cu,Zr)$_z$ magnets.

The structure, anisotropy and coercivity of rapidly quenched TbCu 7-type SmCo7-xZrx alloys and the effects of post-treatments

Hard Magnetic Properties and Thermal Stability for TbCu7-Type SmCo6.4Si0.3Zr0.3 Alloys with Sm Substituted by Various Rare-Earth Elements

An Investigation on Nanocrystalline TbCu 7 -Type SmCo 6.4 Si 0.3 Zr 0.3 C 0.2 Alloys with Sm Partially Substituted by Various Light and Heavy Rare Earth Elements

Phase Formation and Magnetic Properties of (Y1−xSmx)Co5 Melt-Spun Ribbons

Improving the structure, magnetic properties and thermal stability of rapidly quenched TbCu7-type SmCo6.4Si0.3Zr0.3 alloy by carbon addition

Studies on the structure and magnetic properties of Sm2(Fe,Al)17CY alloys with Zr additions

Effect of melt-spinning speed on the microstructure and magnetic properties of Al–Cu–Fe alloy-doped SmCo5 ribbons

Microstructure and magnetic properties of melt-spun Sm(Co0.58Fe0.31Cu0.04Zr0.05B0.02)z ribbons

Effect of Cu substitution on structure and magnetic properties of anisotropic SmCo ribbons

Effect of Cu Contents on Magnetic Properties of the Sm(Co0.74CuxFe0.1Zr0.04)8

Structures and Magnetic Properties of the Co7Hf Melt-Spun Ribbons

Enhanced coercivity of melt-spun Sm(Co,Fe,Cu,Zr)z ribbons annealed by improved process

Temperature dependence of magnetization processes in Sm(Co,Fe,Cu,Zr)$_z$ magnets with different nanoscale microstructures

Microstructure and magnetic properties of Sm-Co-based amorphous nanocrystals controlled by B addition

Fundamental Properties of Melt-Spun Stoichiometric Y2Fe14B Alloy and the Advantages of Nd Substitution

Structure and magnetic properties of alnico alloy doped SmCo5–Cu ribbons

Microstructure and Magnetic Properties of Rapidly Quenched Sm2(Fe,Al,Zr)17C1.5 Ribbons with Zr Additions

Formation, Structure and Magnetic Hardening of Zr Added Sm2(Fe,Al,Zr)17C1.5 Compounds

Mechanism of Ti-rich grain boundary phase formation and coercivity reinforcement in Sm(Fe0.8Co0.2)11TiB melt-spun ribbons

Magnetic hardening in amorphous alloy Sm60Fe30Al10

Hard magnetic properties and microstructures of melt-spun SmCo5Fex (x = 0, 1 and 2) ribbons