Abstract:The performance of perovskite solar cells (PSCs) strongly depends on the electron transport layer (ETL), perovskite absorber, hole transport layer (HTL), and their interfaces. Herein, the first approach to utilize ultrathin 2D titanium‐carbide MXenes (Ti3C2Tx quantum dots, TQD) by engineering the perovskite/TiO2 ETL interface and perovskite absorber and introducing Cu1.8S nanocrystals to perfect the Spiro‐OMeTAD HTL is represented. A significant hysteresis‐free power conversion efficiency improvement from 18.31% to 21.64% of PSCs is achieved after modifications with the enhanced short‐circuit current density, open‐circuit voltages, and fill factor. Various advanced characterizations, including femtosecond transient absorption spectroscopy, electrochemical impedance spectroscopy, and ultraviolet photoelectron spectroscopy, elucidate that the TQD/Cu1.8S significantly contribute to the improved crystalline quality of the perovskite film with its large grain size and improved electron/holes extraction efficiencies at perovskite/ETL and perovskite/HTL interfaces. Furthermore, the long‐time ambient and light stability of PSCs are largely boosted through the TQD and/or Cu1.8S nanocrystals doping, originating from the better crystallization of perovskite, suppressing the film aggregation and crystallization of HTL, and inhibiting the ultraviolet‐induced photocatalysis of the ETL. The findings highlight the TQD and Cu1.8S can act as a superfast electrons and holes tunnel for the optoelectronic devices.

High Efficiency Solar Cells As Fabricated by Sb2S3-modified TiO2 Nanofibrous Networks.

Hierarchical Submicroflowers Assembled from Ultrathin Anatase TiO2 Nanosheets As Light Scattering Centers in TiO2 Photoanodes for Dye-Sensitized Solar Cells

Functions of Self-Assembled Ultrafine TiO2 Nanocrystals for High Efficient Dye-Sensitized Solar Cells

Self-Assembled Amphiphilic Block Copolymers/Cdte Nanocrystals for Efficient Aqueous-Processed Hybrid Solar Cells

Oriented Organization of Poly(3-Hexylthiophene)for Efficient and Stable Antimony Sulfide Solar Cells

High efficiency hybrid solar cells using post-deposition ligand exchange by monothiols.

Study on the Fabrication of PEDOT:PSS/Si Hybrid Solar Cells Incorporated with F4TCNQ and VTMO

Facile Fabrication of CdS–poly(3-hexylthiophene) Hybrid Film with Improved Photo-Current Response for Heterojunction Solar Cells

Synergic Interface and Optical Engineering for High‐Performance Semitransparent Polymer Solar Cells

High-Performance Ultrathin Organic-Inorganic Hybrid Silicon Solar Cells via Solution-Processed Interface Modification.

Oxygen‐Assisted Tailoring of Evaporated PbS Hole Transport Layer for Highly Efficient Antimony Sulfide Solar Cells

Hydrazine Hydrate‐Induced Surface Modification of CdS Electron Transport Layer Enables 10.30%‐efficient Sb2(S,Se)3 Planar Solar Cells

High-performance, Stable and Low-Cost Mesoscopic Perovskite (ch3nh3pbi3) Solar Cells Based on Poly(3-Hexylthiophene)-modified Carbon Nanotube Cathodes

Highly Efficient Inorganic-Organic Heterojunction Solar Cells Based on Sns-Sensitized Spherical Tio2 Electrodes

High-Efficiency Solid-State Dye-Sensitized Solar Cells Based on Tio2-Coated Zno Nanowire Arrays

Textured Perovskite/Silicon Tandem Solar Cells Achieving Over 30% Efficiency Promoted by 4-Fluorobenzylamine Hydroiodide

Hybrid Solar Cells Using Solution-Processed TiO2/Sb2S3 Bilayer As Electron Transport Layer

Dual Interfacial Modification Engineering with 2D MXene Quantum Dots and Copper Sulphide Nanocrystals Enabled High‐Performance Perovskite Solar Cells

All-inorganic Sb2S3-based Two-terminal Tandem Solar Cells Enable over 10.9% Efficiency Employing a Concise Interconnection Layer

Hierarchical Dual‐Scaffolds Enhance Charge Separation and Collection for High Efficiency Semitransparent Perovskite Solar Cells

Hybrid Solar Cells Based on P3ht and Si@Mwcnt Nanocomposite