An Optimization Method of Mold Cavity for Compressor Resin Blade Based on Affine Transformation
Zengqiang Wang,Zhong Liu,Ruisong Jiang,Dezhong Zhao,Mingwei Shao
DOI: https://doi.org/10.3969/j.issn.1000-2758.2017.05.016
2017-01-01
Abstract:A resin blade trends to have a torsion and bending deformation accompanying with the release of its in -ternal stress after being demoulded .Thus, it is in great need to compensate for its deformation during the mold de-sign.The point-to-point deformation compensation method , which is widely used in mold cavity optimization , in-volves two main problems: searching the corresponding points and characterizing the deformation . The corresponding point search method based on the iteration closest point ( ICP ) algorithm is not applicable if the de-formation is large or the model is a non-rigid body; In addition, the local reconstruction deformation often occurs when characterizing the deformation by discrete vectors .To solve these two aforementioned problems , a reverse de-formation method based on affine transformation is presented to optimize the mold cavity , and the corresponding de-formation compensation model is established .The effect of non-rigid body is eliminated by affine transformation , and the deformation is expressed as a smooth spatial transformation matrix which realizes a precise compensation for deformation.The simulation results show that the maximum deviation of the optimized blade decreases from 2. 3360mm to 0.1668mm and the two-dimensional standard deviation decreases from 0.4962mm to 0.0568mm, which confirms that the method can decrease the deformation of resin blade effectively .