Abstract:Two kinds of spherically hierarchical structures were fabricated and characterized in this paper. With rough surfaces of high spatial frequency superimposed on sphere surfaces of lower spatial frequency, the surface morphology of spherically hierarchical structures was simulated, and effects of characteristic parameters on the surface morphology were investigated. Au fiber of diameter Φ30μm was melted from one end for a specific length and cooled down naturally to form an Au microsphere with desirable diameter. ZnO nanowires were hydrothermally synthesized on Au and SiO2 microspheres respectively, producing two types of spherically hierarchical structures. Based on micrographs of scanning electron microscopy (SEM) and operators of filtration, line edge detection and fitting of MatLab software, roundness errors of Au and SiO2 microspheres as well as the surface morphology of corresponding spherically hierarchical structures were characterized. Roundness errors of Au microspheres with diameters Φ197μm and Φ244μm are 2.51μm and 4.08μm respectively, whilst that of SiO2 microspheres with diameters Φ44.5μm and Φ50.2μm are 0.88μm and 0.98μm respectively. Values of characteristic parameters of the surface morphology exhibited that non-Gaussian rough surfaces of spherically hierarchical structures were produced. Simulation results were compared with characterization ones, showing the former is in agreement with the latter. The results can be used to batch fabricate spherically hierarchical structures and to construct corresponding sensors in medicine, biology, electrochemistry, and environmental monitoring domains.

Simulation and ZnO Nanowires-Based Generation of a Hierarchical Structure on an Optical Fiber Core

Preparation and Characterization of a ZnO Nanowires-based Cylindrical Hierarchical Structure

Effects of the Geometries of Micro-Scale Substrates on the Surface Morphologies of ZnO Nanorod-Based Hierarchical Structures

Multiple-Patterning Nanosphere Lithography for Fabricating Periodic Three-Dimensional Hierarchical Nanostructures.

Construction of 3d Arrays of Cylindrically Hierarchical Structures with Zno Nanorods Hydrothermally Synthesized on Optical Fiber Cores

Fabrication of Spherically Hierarchical Structures with ZnO Nanowires Synthesized on Au and SiO2 Microspheres

Synthesis of bilayer ZnO nanowire arrays: Morphology evolution, optical properties and photocatalytic performance

Novel Single-Crystalline Hierarchical Structured Zno Nanorods Fabricated Via A Wet-Chemical Route: Combined High Gas Sensing Performance with Enhanced Optical Properties

Hierarchical Assembly Of Zno Nanostructures On Sno2 Backbone Nanowires: Low-Temperature Hydrothermal Preparation And Optical Properties

Hierarchical Construction of ZnO Architectures Promoted by Heterogeneous Nucleation

4 Nm ZnO Nanocrystals Fabrication Through Electron Beam Irradiation on the Surface of a ZnO Nanoneedle Formed by Thermal Annealing

Fabrication of Hierarchical ZnO Architectures and Their Superhydrophobic Surfaces with Strong Adhesive Force.

Synthesis of ZnO Hierarchical Nanostructures by Fiber-template Method

Symmetric And Asymmetric Growth Of Zno Hierarchical Nanostructures: Nanocombs And Their Optical Properties

Hierarchical ZnO Micro‐/Nano‐Structure Film

Synthesis, Microstructure, and Growth Mechanism of Dendrite ZnO Nanowires

Superhydrophobic surfaces based on ZnO-constructed hierarchical architectures

The Interplay of Structural and Optical Properties in Individual ZnO Nanostructures.

Hierarchical Self-Assembly of Organic Heterostructure Nanowires

Synthesis and optical properties of hierarchical pure ZnO nanostructures

Synthesis and Photocatalysis of Hierarchical Heteroassemblies of ZnO Branched Nanorod Arrays on Ag Core Nanowires