Abstract:In recent years, inspired by “biomimicry”, superhydrophobic surfaces have gained significant attention. Superhydrophobic surfaces demonstrate notable advantages in addressing interfacial issues, and superhydrophobic coatings exhibit excellent waterproofness, anti-fouling, self-cleaning, anti-corrosion, and additional capabilities, making them promising next-generation waterproof materials. However, the complex preparation process, coupled with poor wear resistance and environmental durability, severely limits their practical applications. Therefore, this article started from simplifying the preparation process and improving the durability of the coatings. Epoxy resin (E51) was used as the film-forming material, and carbon nanotubes (CNTs) and dual-sized SiC particles (nano-SiC and micro-SiC) were used as the fillers. Room temperature vulcanized silicone rubber (RTV) was used as a binder interacting with epoxy resin to promote the interface interaction between the fillers and the polymers. This process resulted in the successful preparation of superhydrophobic coatings with outstanding comprehensive performance. When the ratio of μ-SiC to n-SiC was 1:1, the prepared coating exhibited the best superhydrophobic properties with a water contact angle (WCA) of 167.4° and a sliding angle (SA) of 4.6°. Even after undergoing severe mechanical tests, such as sandpaper abrasion for 1000 cycles, sand impact for 100 cycles, cross-cut test, and tape-peeling for 70 cycles, the coatings still maintained their non-wetting Cassie-Baxter state. Furthermore, even after immersion in strong acid, strong alkali and 3.5 wt% NaCl solutions for 6 days, keeping at 500 °C for 2 hours, and exposure to ultraviolet for 6 days, the coatings still exhibited excellent superhydrophobicity. This suggested that the prepared coating had excellent chemical stability and high-temperature resistance. In addition, the superhydrophobic coating exhibited exceptional capabilities in self-cleaning, anti-corrosion, anti-icing, and de-icing properties. Furthermore, this coating, applicable to diverse substrates including board, steel, paper, and glass, demonstrated an impressive water contact angle (WCA) and sliding angle (SA). The spraying method offers the benefits of simplicity and cost-effectiveness. This is poised to significantly broaden its practical applications in various fields, including construction, transportation, and the chemical industry.

Study on the Wetting Behavior and Theoretical Models of Polydimethylsiloxane/Silica Coating

Preparation and Research of Hydrophobic PDMS/Nano-SiO2 Modified SiO2 Coating

Fabrication of Superhydrophobic Coating Based on Waterborne Silicone-Modified Polyurethane Dispersion and Silica Nanoparticles

Fabrication of silicone modified polyurethane matrix superhydrophobic coating with hydroxy-terminated polydimethylsiloxane modified SiO2 nanoparticles

The Icephobicity Comparison of Polysiloxane Modified Hydrophobic and Superhydrophobic Surfaces under Condensing Environments

Fabricating Superhydrophobic and Oleophobic Surface with Silica Nanoparticles Modified by Silanes and Environment-Friendly Fluorinated Chemicals

Fabrication of mechanically robust superhydrophobic surfaces based on silica micro-nanoparticles and polydimethylsiloxane

Functional and versatile superhydrophobic coatings via stoichiometric silanization

Preparation and Characterization of Modified ZrO2/SiO2/Silicone-Modified Acrylic Emulsion Superhydrophobic Coating

Superhydrophobicity Mechanism and Nanoscale Profiling of PDMS-Modified Kaolinite Nanolayers via Ab Initio-MD Simulation and Atomic Force Microscopy Study

Fabrication of high-durability superhydrophobic coatings based on dual-sized SiC particles

Relationship between hydrophobicity and drag reduction of SiO2/HLR-Si coatings

Water Condensation on Superhydrophobic Aluminum Surfaces with Different Low-Surface-Energy Coatings

Nano-silica modified with silane and fluorinated chemicals to prepare a superhydrophobic coating for enhancing self-cleaning performance

Design and preparation of multiple silica particles and study on superhydrophobic modified epoxy resin

Siloxane-Modified UV-Curable Castor-Oil-Based Waterborne Polyurethane Superhydrophobic Coatings

Hydrophobic silane coating films for the inhibition of water ingress into the nanometer pore of calcium silicate hydrate gels

Analysis of wetting properties of microstructured polymer surfaces to achieve superhydrophobic properties

Preparation of superhydrophobic coatings with excellent mechanical and chemical stability by one-step spraying method with selected fluorine-free modifiers

Preparation of Durable Superhydrophobic Coatings Based on Discrete Adhesives

Fabrication of pillar-array superhydrophobic silicon surface and thermodynamic analysis on the wetting state transition