Abstract:Structural vibrations usually exist in the form of low-frequency and broadband elastic waves, so cantilever-like harvesters are not appropriate due to space limitations and high quality factor. Piezoelectric metamaterial plate with local resonators (PMP-LR) has been explored to overcome it. However, how to model and analyze the whole energy harvesting system is still a challenge. In this paper, a self-powered synchronized charge extraction circuit is presented and connected to the PMP-LP as the interface circuit. An elastic-electro-mechanical model is built based on the Kirchhoff plate theory and equivalent impedance method, where equivalent impedance of the self-powered synchronized charge extraction circuit is first derived. Then the elastic-electro-mechanical model is numerically solved by using the Bloch theorem and wave finite element method. By numerical simulations, it is found that the synchronized charge extraction circuit has few effects on vibration bandgaps of the PMP-LR. While by inserting an inductor (<math>Lr</math>) parallel with the clamped capacitor (<math>Cp</math>) of the piezoelectric patch, we can see that a new dispersion curve is induced by the <math>Lr-Cp</math> electrical resonance and the inductor is beneficial for low-frequency and broadband vibration energy harvesting. In particular, the inductor can greatly improve the harvesting performance when the resonant frequency is equal to the excitation frequency. In the end, experiments are done and the results are consistent with the numerical ones. Excitingly, the output voltage amplitude of the piezoelectric patch is enlarged about 200% after using the resonant inductor.

Parametric Design for a Piezoelectric Cantilever Carrying Oscillators to Harvest Multi-Frequency Vibration Energy

A Piezoelectric Cantilever with an Oscillator for Multi-Mode Vibration Energy Harvesting

Enhancing Output Power of A Piezoelectric Cantilever Energy Harvester Using an Oscillator

Optimization of cantilevered piezoelectric energy harvester with a fixed resonance frequency

A Multi-Mode Broadband Vibration Energy Harvester Composed of Symmetrically Distributed U-Shaped Cantilever Beams

Design and Analysis of a Magnetically Coupled Multi-Frequency Hybrid Energy Harvester

Multi-Variable Optimization to Enhance the Performance of a Cantilevered Piezoelectric Harvester

Development of Multi-Degree-Of-Freedom Piezoelectric Energy Harvester Using Interdigital Shaped Cantilevers

Design and Optimization of Piezoelectric Cantilever Beam Vibration Energy Harvester

A broadband and multiband magnetism-plucked rotary piezoelectric energy harvester

A Hybrid Piezoelectric and Electromagnetic Broadband Harvester with Double Cantilever Beams

Performance Analysis of Low-Frequency Piezoelectric Energy Harvesting Systems with Multiple Nonlinear Factors and Bidirectional Excitations

Bi-Directional Piezoelectric Multi-Modal Energy Harvester Based on Saw-Tooth Cantilever Array

Design Optimization of PVDF-based Piezoelectric Energy Harvesters

Elastic-electro-mechanical modeling and analysis of piezoelectric metamaterial plate with a self-powered synchronized charge extraction circuit for vibration energy harvesting

Design of Piezoelectric Metastructures with Multi-Patch Isogeometric Analysis for Enhanced Energy Harvesting and Vibration Suppression

Dynamic Design of a Quad-Stable Piezoelectric Energy Harvester via Bifurcation Theory

Low frequency piezoelectric energy harvesting at multi vibration mode shapes

Design, development, and theoretical and experimental tests of a nonlinear energy harvester via piezoelectric arrays and motion limiters

Experimental and simulation of a tension-like nonlinear piezoelectric energy harvester

Multimodal Design Of A Novel Mems Structure For Piezoelectric Energy Harvester