A Facile Method to Fabricate Superparamagnetic Γ-Fe2o3/silica Nanotubes Using Multi-Walled Carbon Nanotubes As Template

Jiehe Sui,Jing Li,Shujie Yang,Zhiguo Li,Wei Cai

DOI: https://doi.org/10.1016/j.matlet.2013.02.098

IF: 3

2013-01-01

Materials Letters

Abstract:Superparamagnetic γ-Fe2O3/silica nanotubes were synthesized by calcinating MWCNTs template among the silica coated MWCNTs/Fe3O4 nanocomposites fabricated using the Stöber method.

What problem does this paper attempt to address?

A Facile Method to Fabricate Silica-Coated Carbon Nanotubes and Silica Nanotubes from Carbon Nanotubes Templates

Yingkui Yang,Shengqiang Qiu,Wei Cui,Qiang Zhao,Xinjian Cheng,Robert Kwok Yiu Li,Xiaolin Xie,Yiu-Wing Mai

DOI: https://doi.org/10.1007/s10853-009-3687-1

IF: 4.5

2009-01-01

Journal of Materials Science

Abstract:Silica-coated multiwalled carbon nanotubes (MWCNTs) have been prepared by the sol–gel polymerization of tetraethoxysilane (TEOS) in the presence of the acid-oxidized MWCNTs at room temperature, followed by oxidizing the MWCNTs templates at high temperature in air to produce hollow silica nanotubes. The thickness and architectures of silica shell were well controlled by rationally adjusting the concentration of TEOS, and by adding cationic surfactant as a structure-directing agent. These results also give a clear answer to prove the fact that the structures of spherical silica particles can be fully “copied” to the coating shell and the wall of silica nanotubes when prepared by the same method as the synthesis of silica particles in the presence of templates.
Superparamagnetic Cobalt-Ferrite-Modified Carbon Nanotubes Using A Facile Method

Wei Jiang,Yong Liu,Fengsheng Li,Jianjun Chu,Kai Chen

DOI: https://doi.org/10.1016/j.mseb.2009.10.013

2010-01-01

Abstract:Cobalt ferrite (CoFe2O4)/carbon nanotube (CNT) magnetic nanocomposites were synthesized by a facile solvothermal method. X-ray powder diffractometry (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), High-resolution electron microscopy (HRTEM) analyses demonstrate that cubic CoFe2O4 nanoparticles were immobilized on the external surfaces of the CNTs. Vibrating sample magnetometer (VSM) measurements indicated that the nanocomposites at room temperature were superparamagnetic with a saturation magnetization of 29.6emug−1.
Facile decoration and characterization of multi-walled carbon nanotubes with magnetic Fe 3O 4 nanoparticles

Yuedan Zhong,Guiyin Li,Suqin Liu,Ming Zhong,Hao Wang,Hongliang Li

2012-01-01

Journal of optoelectronics and advanced materials

Abstract:Magnetic Fe 3O 4/multi-walled carbon nanotubes (MWNTs) nanocomposites have been fabricated by a green and simple hydrothermal method. It has been found that Fe 3O 4 nanoparticles with diameters in the range of 15-30 nm were firmly decorated on the external surfaces of MWNTs. The Fe 3O 4/MWNTs nanocomposites exhibited good ferromagnetic behavior with a high saturation magnetization of 55.833 emu/g and a coercivity of 97.062 G. Furthermore, the Fe 3O 4/MWNTs nanocomposites could be quickly separated or redispersed from aqueous solution with the application of external magnetic field.
The fabrication and application of magnetite coated N-doped carbon microtubes hybrid nanomaterials with sandwich structures

Min Zhang,Liangfei Chen,Jing Zheng,Weizhen Li,Tasawar Hayat,Njud S Alharbi,Wenjun Gan,Jingli Xu

DOI: https://doi.org/10.1039/c7dt01155e

2017-07-18

Abstract:In this work, N-doped carbon microtubes have been synthesized using MoO3 microrods as the sacrificial template. Then, the Fe3O4 nanoparticles were integrated into N-doped carbon microtubes to obtain triple-walled Fe3O4@N-doped carbon@Fe3O4 microtubes via a high temperature decomposition process. Due to the coordination ability of nitrogen and the unique structures of the N-doped carbon microtubes, the Fe3O4 nanoparticles were closely attached to both the external and internal surfaces of the N-doped carbon microtubes and thus, assured a relatively good response to an external magnetic field. All these features make the nanocomposites well fitted for adsorption, catalysis, energy storage etc. Moreover, the N-doped carbon microtubes can be used as versatile templates to synthesize other triple-walled composites M@N-doped carbon@M microtubes (such as M = Cu(Cu2O), MnO2, MoS2), which greatly widens the applications of N-doped carbon microtubes.
Fabrication of "Tadpole"-Like Magnetite/Multiwalled Carbon Nanotube Heterojunctions and Their Self-Assembly under External Magnetic Field

Baoping Jia,Lian Gao

DOI: https://doi.org/10.1021/jp070675p

2007-01-01

Abstract:Novel "tadpole"-like Fe3O4/multiwalled carbon nanotube (MWCNT) heterojunctions were successfully synthesized by position-selectively attaching Fe3O4 sphere on the tips of MWCNTs through a straightforward and effective polyol-medium solvothermal method. Transmission and scanning electron microscopy (TEM and SEM) and X-ray diffraction (XRD) investigations show these Fe3O4 spheres are constructed with tiny nanocrystallites (approximately 5 nm in average diameter), which were preferentially aggregated in an oriented pattern on the open ends of the MWCNT template. Magnetic investigation indicates this novel Fe3O4/MWCNT hybrid presents superparamagnetic behavior. The size and corresponding magnetic performance of these magnetite/MWCNT hybrids can be adjustable to some extent for specific applications through altering the reaction parameters. Furthermore, these tadpolelike nanocomposites can orient and self-assemble into one-dimensional structure under external magnetic field, displaying great potential in precise manipulation and organization of carbon nanotube-based structures into integrated functional system.
Fabrication of Ag2SiO3/SiO2 Composite Nanotubes Using a One-Step Sacrificial Templating Solution Approach

X. Cui,S.-H. Yu,L. Li,K. Li,B. Yu

DOI: https://doi.org/10.1002/adma.200400081

IF: 29.4

2004-01-01

Advanced Materials

Abstract:Nanoscale building blocks such as quantum dots, nanowires, and nanotubes have received a great deal of attention recently owing to their promising applications in various fields.([1-3]) Hollow nanostructures represent an interesting and important class of nanomaterials with wide applications, such as drug delivery, ([4-7]) cell and enzyme transplantation,([5,8]) gene therapy,([9]) and contaminated waste removal.([10]) Recently, the synthesis of inorganic nanostructures such as hollow tubes and nanowires has attracted a lot of research,([11]) owing to their potential applications in catalysis and bioanalysis,([12]) as well as bright visible photoluminescence.([13]) The modified silica nanotubes and nanotube membranes have shown potential applications in bioseparation and biocatalysis.
Preparation of CNTs-supported Fe3O4 and Fe3C Nano-particles and the Investigation on their Magnetic Properties

guifen yi,xiaobin zhang,fu liu,jipeng cheng,yuhong mi,huai zhang

DOI: https://doi.org/10.1109/NEMS.2006.334865

2006-01-01

Abstract:Magnetite (Fe3O4) nanoparticles uniformly loaded on multi-walled carbon nanotubes (MWCNTs) were synthesized by a wet chemistry method, and then carbon coated Fe3C nanoparticles supported by MWCNTs were prepared by heat-treatments subsequently in nitrogen at 600 degC and in acetylene atmosphere at 500 degC. The as-prepared nanoparticles were all single crystals with a size distribution ranging from 10 to 60nm upon TEM and XRD measurements. The magnetic properties of these two kinds of nanoparticles were measured using vibrating sample magnetometer (VSM) at room temperature. The results show that above materials are useful for magnetic materials, and the method to produce magnetic nanoparticles coated with graphite is rather simple
An efficient method for decoration of the multiwalled carbon nanotubes with nearly monodispersed magnetite nanoparticles

Haitao Wang,Lili Cao,Shancheng Yan,Ningping Huang,Zhongdang Xiao

DOI: https://doi.org/10.1016/j.mseb.2009.08.012

2009-01-01

Abstract:A one-pot method has been developed to prepare magnetite nanoparticles decorated carbon nanotubes (CNTs) by thermal decomposition of iron chloride on CNTs templates in diethylene glycol. The morphological and structural characterizations indicate that magnetite nanoparticles are coated on the surfaces of the CNTs to form CNT-based nanocomposites. The density of magnetite nanoparticles on CNTs could be easily tuned by adjusting the weight ratio of iron chloride to CNTs. Magnetic measurements showed that the nanocomposites are superparamagnetic at room temperature and the magnetic properties of the samples can also be tuned by adjusting preparing conditions. The nanocomposites can be readily dispersed in water to form a stable solution and can be manipulated using an external magnetic field. As-synthesized nanocomposites may have potential applications in target–drug delivery, detection and separations, and in clinical diagnosis.
Facile fabrication of magnetite microtubes from electrospun fiber template

Ruiyu Wang,Dan Chen,Lulu Ren,Juan Guo,Tianxi Liu

DOI: https://doi.org/10.1557/jmr.2011.75

IF: 2.7

2011-01-01

Journal of Materials Research

Abstract:The preparation and characterization of Fe 3 O 4 microtubes by a polymer-based template approach were described. Fe 3 O 4 tubes with diameter of 600 ± 50 nm and an average tube thickness of about 50 nm were fabricated after removing the electrospun polystyrene fiber template. The microtubes were composed of individual Fe 3 O 4 nanocrystals. The synthesis process was ambient, generalizable, inexpensive, and nontoxic. The magnetite tubes thus fabricated behave with a saturation magnetization of 37 emu/g measured in the vibrating sample magnetometer. The microtubes prepared in this way might find potential applications in catalysis, magnetic fluid, and biological field.
One-step Nanocasting Synthesis of Mesostructured Magnetic Fe/γ-Fe 2 O 3 /graphitic Carbon Composites

Qianyu Zhang,Bo Li,Zhen Ma,Yangang Wang,Xi Li

DOI: https://doi.org/10.1016/j.jallcom.2014.08.086

IF: 6.2

2014-01-01

Journal of Alloys and Compounds

Abstract:A one-step nanocasting route was employed to prepare mesostructured magnetic Fe/γ-Fe2O3/graphitic carbon composites using iron nitrate as iron source, soybean oil as carbon precursor, and SiO2 as hard template. The results show that the introduction of a certain amount of soybean oil did not affect the gelation process, and the ultimately formed magnetic Fe/γ-Fe2O3 nanoparticles were homogeneously dispersed into the matrix of mesostructured carbon with a large pore volume and high surface area, giving this magnetic composite material potential applications as catalyst support or absorbent.
Preparation and Magnetic Property of Multiwalled Carbon Nanotubes Decorated by Fe3O4 Nanoparticles

Fan Xiu-juan,Li Xin

DOI: https://doi.org/10.1016/s1872-5805(12)60007-9

IF: 5.7

2012-01-01

New Carbon Materials

Abstract:Iron oxide (Fe3O4) nanoparticles with average sizes of 6 and 10 nm were synthesized by a chemical co-precipitation method from mixtures of FeCl2·4H2O and FeCl3·6H2O. They were ultrasonicated with HNO3-oxidized MWCNTs in a solution (water/ethanol=1:1v/v) to carry out the decoration. The structure and properties of as-obtained Fe3O4/MWCNT composites were characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, vibrating sample magnetometry, X-ray diffraction and thermal gravimetry. Results showed that the Fe3O4 contents in the composites were 26.6 and 29.3% for particle sizes of 6 and 10 nm, and their saturation magnetizations were 16.5 and 7.5 emu·g−1 respectively.
Fabrication Method of Parallel Mesoporous Carbon Nanotubes

Xuecheng Chen,Krzysztof Cendrowski,Joanna Srenscek-Nazzal,Mark Ruemmeli,Ryszard J. Kalenczuk,Hongmin Chen,Paul K. Chu,Ewa Borowiak-Palen

DOI: https://doi.org/10.1016/j.colsurfa.2010.12.044

IF: 5.518

2011-01-01

Colloids and Surfaces A Physicochemical and Engineering Aspects

Abstract:A facile approach to prepare parallel mesoporous carbon nanotubes fabricated from an anodised aluminum oxide (AAO) template loaded with mesoporous silica by combining sol–gel and chemical vapor deposition (CVD) techniques is presented. The carbon nanotube walls that grow during CVD process copy the mesoporous structure of silica without removing the surfactant. The mechanism of formation of mesoporous carbon nanotubes was also studied. The technique results in a simple and efficient manner to produce parallel mesoporous carbon nanotubes exhibiting high specific surface area.
Superparamagnetic high-magnetization composite microspheres with Fe 3 O 4 @SiO 2 core and highly crystallized mesoporous TiO 2 shell

zhaogang teng,xiaodan su,guotao chen,congcong tian,hao li,li ai,guangming lu

DOI: https://doi.org/10.1016/j.colsurfa.2012.03.019

2012-01-01

Abstract:We demonstrate a novel synthesis of sandwich structured superparamagnetic mesoporous microspheres with a silica-coated magnetite core and mesoporous titania shell using a block-copolymer-templating approach. The synthesis process is simple and facile, in which uniform magnetite particles were coated with silica through classical Stöber method. And then, a mesostructured P123/TiO2 composite was deposited on the silica-coated magnetite core by using Pluronic P123 block-copolymer as a template and tetrabutyl titanate (TBOT) as a precursor in ethanol aqueous solution. After calcination at 400°C, the superparamagnetic microspheres with crystallized mesoporous titania shell were obtained. The sandwich structures of the obtained composite microspheres have been confirmed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). The TEM and SEM images show that the microspheres possess a uniform diameter of ∼420nm and a homogeneous mesoporous shell of ∼40nm. The XRD indicates that mesoporous shell is highly crystallized anatase titania. The obtained microspheres possess tunable specific surface areas of 50–100m2/g, and controlled large mesopore sizes of 3.7–5.0nm. Furthermore, the resulting superparamagnetic microspheres with a high saturation magnetization value of ∼34emu/g could be enriched completely within 10s under the application of a 0.2T magnet.
An Easy Approach to Encapsulating Fe3O4 Nanoparticles in Multiwalled Carbon Nanotubes

Li Jian-hua,Hong Ruo-yu,Luo Guo-hua,Zheng Ying,Li Hong-zhong,Wei Dong-guang

DOI: https://doi.org/10.1016/s1872-5805(09)60026-3

IF: 10.9

2010-01-01

Carbon

Abstract:Carbon nanotubes filled with magnetic materials are very interesting as new materials for applications in biomedicine. A simple and efficient method was developed to encapsulate Fe3O4 nanoparticles in multiwalled carbon nanotubes (MWCNTs). Transmission and scanning electron microscopy, energy dispersive X-ray analysis, and X-ray powder diffraction measurements confirmed that the Fe3O4 nanoparticles are encapsulated in the MWCNTs. The magnetic properties of the MWCNTs and the Fe3O4-filled MWCNTs were measured using a vibrating sample magnetometer. Results showed that the Fe3O4-filled MWCNTs exhibited superparamagnetism at room temperature and possessed a higher saturation magnetization (Ms) (around 13.15 emu/g) than that of the unfilled ones (around 0.35 emu/g). The MWCNTs encapsulating Fe3O4 nanoparticles have potential applications in engineering and medicine.
Fabrication of silica nanoparticles on the surface of functionalized multi-walled carbon nanotubes

Hongfu Zhou,Chen Zhang,Hangquan Li,Zhongjie Du

DOI: https://doi.org/10.1016/j.carbon.2010.08.051

IF: 10.9

2011-01-01

Carbon

Abstract:A method for the preparation of a hybrid material consisting of various size silica nanoparticles attached to multi-walled carbon nanotubes (MWCNTs) is proposed. Poly (acrylic acid) oligomer was first reacted with hydroxyl groups on acid-treated MWCNTs leading to a grafted encapsulation of the MWCNTs. These were subsequently reacted with 3-aminopropyltriethoxysilane (APTES) resulting sub-grafting of APTES on the MWCNTs. Such MWCNTs (siloxane-MWCNTs) were further hydrolyzed to make MWCNTs indirectly bearing Si–OH groups. Finally, a bud-like MWCNT/silica hybrid was obtained by forming a number of silica nanoparticles from Si–OH groups on the surface of MWCNTs by introducing siloxane-MWCNTs into a solution of tetraethyl orthosilicate, ammonia, and ethanol. The average size of the silica nanoparticles on the surface of the MWCNTs could be controlled by adjusting the concentration of ammonia and the reaction time.

materials science, multidisciplinary,chemistry, physical
Sonochemical Synthesis of Magnetic Properties of Fe3O4/CNT Nanocomposites

Rui Yu,Chengfa Jiang,Wei Chu,Jianghao Zhao,Wenjing Sun,Maofei Ran

DOI: https://doi.org/10.1080/10584587.2017.1330633

2017-01-01

Integrated Ferroelectrics

Abstract:Fe3O4/CNT hybrids have been successfully synthesized through simple one-step methods. The resulting composites were characterized via transmission electron microscopy (TEM), X-ray diffractometry (XRD), Fourier transform infrared (FTIR) and vibration and sample magnetometry (VSM) approaches. It was found that those Fe3O4/CNT nanocomposites were superparamagnetic. TEM observation indicated that the produced Fe3O4 particles were decorated the external walls of CNTs. The increasing of the ultrasonic times result in the changes in the average particle sizes of the Fe3O4 particles. For the Fe3O4/CNT composites, larger particle sizes lead to the greater magnetic responses.
Facile Synthesis of Fe3O4/SiO2 Composite Nanoparticles from Primary Silica Particles

Ziyang Lu,Jie Dai,Xiangning Song,Gang Wang,Wensheng Yang

DOI: https://doi.org/10.1016/j.colsurfa.2007.11.020

IF: 5.518

2007-01-01

Colloids and Surfaces A Physicochemical and Engineering Aspects

Abstract:A facile method was developed for preparation of Fe3O4/SiO2 composite nanoparticles by direct introduction of Fe3O4 nanoparticles into the Stöber process upon formation of the primary silica particles. When the Fe3O4 nanoparticles were added into the reaction mixture at appropriate time, the primary particles can quickly aggregate with the Fe3O4 nanoparticles, thus suppressing the dipole–dipole interactions among the magnetic nanoparticles effectively and allowing the synthesis of Fe3O4/SiO2 composite nanoparticles with defined structure by further deposition of silica layer. Such a method can also be applied for coating silica layer on other water soluble nanoparticles with surface affinity to silica, such as 3-mercaptopropionic acid (MPA) capping ZnS:Mn and citrate modified Au nanoparticles.
Facile attachment of magnetic nanoparticles to carbon nanotubes via robust linkages and its fabrication of magnetic nanocomposites

Chen Qin,Jianfeng Shen,Yizhe Hu,Mingxin Ye

DOI: https://doi.org/10.1016/j.compscitech.2008.11.011

IF: 9.1

2009-01-01

Composites Science and Technology

Abstract:Magnetic nanoparticles were facilely attached to multi-walled carbon nanotubes (MWCNTs) by high-temperature reaction of ferric triacetylacetonate in 1-methyl-2-pyrrolidone in the presence of carboxylated MWCNTs. X-ray diffraction, transmission electron morphology and thermogravimetric analysis were used to demonstrate the successful attachment of iron oxide nanoparticles to MWCNTs. It was found that the attached nanoparticles were mainly magnetite. Investigations using Fourier transform infrared spectroscopy proved that the tight attachment was due to the robust linkages: metal-carbonyl coordination. Modified carbon nanotubes were introduced into epoxy resins to fabricate magnetic nanocomposites. Magnetic properties were analyzed by vibrating sample magnetometer.
Simplified Synthesis of Cobalt Ferrite Nanotubes Using Sol–Gel Method

GB Ji,HL Su,SL Tang,YW Du,BL Xu

DOI: https://doi.org/10.1246/cl.2005.86

2004-01-01

Chemistry Letters

Abstract:Cobalt ferrite nanotubes with diameter of 50 nm were prepared using a simple sol-gel process within the pores of anodic aluminum oxide (AAO) template. SEM, TEM, XRD, VSM were used to characterize the morphology, crystalloid structure, and magnetic properties of the samples. The results indicate that the cobalt ferrites thus prepared were polycrystalline phase with the smooth and uniform tube-like structure. The method is also expected to be applicable to the preparation of other multicomponent oxide nanotubes.
Template synthesis, characterization and magnetic property of Fe nanowires-filled amorphous carbon nanotubes array

Lifeng Liu,Shicheng Mu,Sishen Xie,Weiya Zhou,Li Song,Dongfang Liu,Shudong Luo,Yanjuan Xiang,Zengxing Zhang,Xiaowei Zhao,Wenjun Ma,Jun Shen,Chaoying Wang,Gang Wang

DOI: https://doi.org/10.1088/0022-3727/39/18/003

2006-01-01

Abstract:A Fe nanowires-filled amorphous carbon nanotubes (FeNW-filled a-CNTs) array was synthesized by sequential growth of electrodeposited Fe nanowires and subsequent chemical vapour deposition of amorphous CNTs in the nanochannels of alumina template. Structural characterizations of as-prepared FeNW-filled a-CNTs were carried out via field emission scanning electron microscope (FE-SEM), x-ray diffraction (XRD), elemental mapping, high-resolution transmission electron microscope (HRTEM) and Raman scattering. The formation mechanism of such Fe/C nanoheterostructure was proposed according to the detailed HRTEM analyses. Furthermore, the room temperature magnetic property of the as-prepared FeNW-filled a-CNTs array was also investigated, and obvious anisotropic behaviour in magnetization was observed.

A Facile Method to Fabricate Superparamagnetic Γ-Fe2o3/silica Nanotubes Using Multi-Walled Carbon Nanotubes As Template

A Facile Method to Fabricate Silica-Coated Carbon Nanotubes and Silica Nanotubes from Carbon Nanotubes Templates

Superparamagnetic Cobalt-Ferrite-Modified Carbon Nanotubes Using A Facile Method

Facile decoration and characterization of multi-walled carbon nanotubes with magnetic Fe 3O 4 nanoparticles

The fabrication and application of magnetite coated N-doped carbon microtubes hybrid nanomaterials with sandwich structures

Fabrication of "Tadpole"-Like Magnetite/Multiwalled Carbon Nanotube Heterojunctions and Their Self-Assembly under External Magnetic Field

Fabrication of Ag2SiO3/SiO2 Composite Nanotubes Using a One-Step Sacrificial Templating Solution Approach

Preparation of CNTs-supported Fe3O4 and Fe3C Nano-particles and the Investigation on their Magnetic Properties

An efficient method for decoration of the multiwalled carbon nanotubes with nearly monodispersed magnetite nanoparticles

Facile fabrication of magnetite microtubes from electrospun fiber template

One-step Nanocasting Synthesis of Mesostructured Magnetic Fe/γ-Fe 2 O 3 /graphitic Carbon Composites

Preparation and Magnetic Property of Multiwalled Carbon Nanotubes Decorated by Fe3O4 Nanoparticles

Fabrication Method of Parallel Mesoporous Carbon Nanotubes

Superparamagnetic high-magnetization composite microspheres with Fe 3 O 4 @SiO 2 core and highly crystallized mesoporous TiO 2 shell

An Easy Approach to Encapsulating Fe3O4 Nanoparticles in Multiwalled Carbon Nanotubes

Fabrication of silica nanoparticles on the surface of functionalized multi-walled carbon nanotubes

Sonochemical Synthesis of Magnetic Properties of Fe3O4/CNT Nanocomposites

Facile Synthesis of Fe3O4/SiO2 Composite Nanoparticles from Primary Silica Particles

Facile attachment of magnetic nanoparticles to carbon nanotubes via robust linkages and its fabrication of magnetic nanocomposites

Simplified Synthesis of Cobalt Ferrite Nanotubes Using Sol–Gel Method

Template synthesis, characterization and magnetic property of Fe nanowires-filled amorphous carbon nanotubes array