Abstract:Nanocellulose-based porous materials have been recently considered as ideal candidates in various applications. However, challenges on performances remain owing to the disorderly structure and the limited transport specificity. Herein, wood-inspired composite sponges consisting of cellulose nanofibrils (CNFs) and high-aspect-ratio silver nanowires (AgNWs) were generated with anisotropic properties by the directional freeze-drying. The obtained composite sponges exhibited attractive features, such as an excellent compressive stress of 24.5 kPa, low percolation threshold of 0.1 vol % AgNWs, and high electrical conductivity of 1.52 S/cm. Furthermore, the self-assembled ordered structure in the longitudinal direction and synergistic effect between CNFs and AgNWs benefited the sponge interesting anisotropic electrical conductivity, thermal diffusivity, ultrafast electrically induced heating (<5 s), sensitive pressure sensing (errors <0.26%), and electromagnetic interference (EMI) shielding for special practical demands. This multifunctional material inspired by natural woods is expected to broaden new applications as electronic devices for an intelligent switch or EMI shielding.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10645?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10645</a>.Characterizations of raw materials (Figure S1); the stability of the precursor dispersions (Figure S2); SEM images of conductive CA-d sponges with 0.4 and 0.5 vol % AgNWs (Figure S3); SEM images of conductive CA-n sponges with different volume fractions of AgNWs (Figure S4); the pore distributions and XRD patterns of conductive sponges (Figure S5); resistance values of CA-d-longitudinal sponges with different volume fractions of AgNWs (Figure S6); the dependence of the conductivity (σ) on the volume fraction of AgNWs (Figure S7); resistance values of CA-d-transverse sponges with different volume fractions of AgNWs (Figure S8); resistance values of CA-n sponges with different volume fractions of AgNWs (Figure S9); density and porosity of CA-d (Table S1); the summary of density and EMI parameters for typical porous materials (Table S2); comparison between true and experimental values (Table S3) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10645/suppl_file/am0c10645_si_001.pdf">PDF</a>)Simulation of EMI shielding application of the sponge of CA-d-0.3 without an iron cover, and with an iron cover, respectively (Video S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10645/suppl_file/am0c10645_si_002.avi">AVI</a>)Simulation of EMI shielding application of the sponge of CA-d-0.3 with an iron cover having an unobstructed hole, and with an iron cover having a hole covered with an iron sheet, respectively (Video S2) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10645/suppl_file/am0c10645_si_003.avi">AVI</a>)Simulation of EMI shielding application of the sponge of CA-d-0.3 with an iron cover having a hole covered with the longitudinal plane of the sponge, and with an iron cover having a hole covered with the transverse plane of the sponge, respectively (Video S3) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10645/suppl_file/am0c10645_si_004.avi">AVI</a>)This article has not yet been cited by other publications.

Carbon Nanotube Sponge‐Array Tandem Composites with Extended Energy Absorption Range

Structured Carbon Nanotube–elastomer Nanocomposites with a Morphing–contact Mechanism for an Advanced Underwater Perception Warning System

Three-dimensional carbon nanotube sponge-array architectures with high energy dissipation.

Carbon Nanotube Sponges, Aerogels, and Hierarchical Composites: Synthesis, Properties, and Energy Applications

Elastic Improvement of Carbon Nanotube Sponges by Depositing Amorphous Carbon Coating

Hierarchical network structural composites for extraordinary energy dissipation inspired by the cat paw

Crack‐Induced Superelastic, Strength‐Tunable Carbon Nanotube Sponges

Soft, highly conductive nanotube sponges and composites with controlled compressibility.

Energy-Absorbing Hybrid Composites Based On Alternate Carbon-Nanotube And Inorganic Layers

Three-dimensional Sponges with Super Mechanical Stability: Harnessing True Elasticity of Individual Carbon Nanotubes in Macroscopic Architectures

Carbon Nanotube Reinforced Structural Composite Supercapacitor

A new-structured nanocarbon cushion with highly impact-resistant properties

Compressive Mechanical Properties of Carbon Nanotube Sponges: Experiments and Modeling

Bio-inspired multi-cell tubular structures approaching ideal energy absorption performance

Foam-filled Lightweight Braided-Textile Reinforced and Nested Tubular Structures for Energy Absorption Applications

Composite Carbon Nanotube/Silica Fibers with Improved Mechanical Strengths and Electrical Conductivities

Wood-Inspired Anisotropic Cellulose Nanofibril Composite Sponges for Multifunctional Applications

Lightweight and dual-functional composites with stiff-soft microstructure for energy absorption and thermal insulation

Hierarchical Agglomerates of Carbon Nanotubes As High-Pressure Cushions.

Effects of multi walled carbon nanotubes and multilayer graphene on the damping and quasi-static compressive mechanical properties of novel EP/ZA22 composites

Design of conical hollow ZnS arrays vertically grown on carbon fibers for lightweight and broadband flexible absorbers