Abstract:Electrospinning as a cost-effective process to synthesize nanofiber with controlled morphology and structure has regained attention in the last decade as result of rapid advancements in nanoscale science and engineering and their applications. Although there are a few works demonstrated the ability to fabricate nano gas sensor using electrospun nanofibers as sensing materials, there are limited works to show the optimization of the sensing performance by understanding the electron transport properties and their sensing mechanism. The overall objective of this work is to electrospun conducting polymer/insulating polymer composite nanofibers (i.e., (+)- camphor-10-sulfonic acid (HCSA) doped polyanline PANI (conductive) blended with PEO (non-conductive)) with different compositions (i.e., 12 to 68 wt.%) and apply them as chemiresistive sensing material to detect ammonia at room temperature. The diameter, defects, and morphology of nanofibers were adjusted by controlling solution composition, processing parameters and their effect toward the sensing performance were also investigated. Viscosity of electrospinning solutions was found to have a pronounced impact on fiber diameter and morphology of PANI/PEO nanofibers. Diameters around 350nm of different compositions of PANI/PEO nanofibers were achieved, where decreasing solution viscosity by increasing the PANI content resulted in a morphology changing from individual fibers to junctions. Although all the compositions of PANI/PEO nanofibers show semiconducting behavior and fit a three dimensional variable hopping range model, the activation energy and hopping distance increased as the PANI content decreased. The PANI/PEO nanofibers exhibited excellent sensitivity towards NH3 with fast response and recovery times where a low detection limit of 0.5 ppm with the sensitivity of 5.6 %/ppm of NH3 was achieved from 26 wt.% PANI/PEO nanofibers. Additionally, the PANI/PEO nanofibers response toward water vapor changed from positive to negative indicating the humidity independent ammonia gas sensor can be fabricated by controlling the composition of PANI/PEO nanofibers.

Ultralow-Limit Gas Detection in Nano-Dumbbell Polymer Sensor Via Electrospinning

Polymer Single-Nanowire Optical Sensors

Polymer Film Coated Micro/Nanofiber for Gas Sensing

Preparation, modification, morphology tailor and application of conjugated conductive polymer in chemical sensors

Morphology Tailoring of Nano/Micro-Structured Conductive Polymers, Composites and Their Applications in Chemical Sensors

Gas Sensors Based on Electrospun Nanofibers

Polyaniline nanofiber gas sensors by direct-write electrospinning

Gas Sensing Properties of A Composite Composed of Electrospun Poly(Methyl Methacrylate) Nanofibers and in Situ Polymerized Polyaniline

Quantum-dot-doped polymer nanofibers for optical sensing.

Ultra-Flexible, Breathable, and Robust PAN/MWCNTs/PANI Nanofiber Networks for High-Performance Wearable Gas Sensor Application

An easy-fabricated hydrogen gas sensor based on palladium-decorated polyurethane nanofibers

Nanoparticles: Single Nanoparticle Detection and Sizing Using a Nanofiber Pair in an Aqueous Environment (Adv. Mater. 44/2014)

Bioinspired Gas‐Confined Hollow Microfiber with 2D Conducting Polymer/Graphene Skeleton for Ultrasensitive Liquid Environment Sensor

Ultrasensitive flexible NO2 gas sensors via multilayer porous polymer film

Applications of Electrospun One-Dimensional Nanomaterials in Gas Sensors

Electrospun Nanomaterials for Ultrasensitive Sensors.

Single metal and conducting polymer nanowire sensors for chemical and DNA detections

Electrospinning of Ultrafine Conducting Polymer Composite Nanofibers with Diameter Less than 70 nm as High Sensitive Gas Sensor

Electrospun Polyaniline/Poly(ethylene oxide) Composite Nanofibers Based Gas Sensor

Highly sensitive detection of nitroaromatic explosives using an electrospun nanofibrous sensor based on a novel fluorescent conjugated polymer

Composite nanofibers of conducting polymers and hydrophobic insulating polymers: Preparation and sensing applications