Abstract:We describe the modeling of magnetoelectric (ME) effect in the plate-type Terfenol-D/PZT laminate composite by introducing a newly proposed interface coupling factor into the equivalent circuit model, aiming at providing a guidance for designing, fabricating and using the ME laminate composite based devices, such as current sensor, magnetic sensor, energy harvester, and wireless energy transfer system. Considering that the strains of the magnetostrictive and piezoelectric layers are not equal in actual operation due to the epoxy resin adhesive bonding condition, the equivalent circuit models of magnetostrictive and piezoelectric layers are created based on the constitutive equation and the equation of motion, respectively. An interface coupling factor k(c) is introduced which physically reflects the strain transfer condition between the magnetostrictive and piezoelectric phases. Specifically, the respective equivalent circuit models of magnetostrictive and piezoelectric layers are combined with an ideal transformer whose turn-ratio is just the interface coupling factor. Furthermore, the theoretical expressions containing k(c) for the longitudinal ME voltage coefficient alpha(v) and the optimum thickness ratio n(optim) to which the maximum ME voltage coefficient corresponds are derived from the modified equivalent circuit model of ME laminate, where the interface coupling factor acts as an ideal transformer. To explore the influence of mechanical load on the interface coupling factor k(c), two sets of weights, i.e., 100 g and 500 g, are placed on the top of the ME laminates, each with the same thickness ratio n in the sample fabrication for comparison. A total of 12 L-T mode plate-type ME laminate samples with different-thickness configurations are fabricated. The interface coupling factors determined from the measured alpha(v) and the DC bias magnetic field H-bias are 0.15 for 500 g pre-mechanical load and 0.10 for 100 g pre-mechanical load, respectively. Furthermore, the measured optimum thickness ratios are 0.57 for k(c) = 0 : 1 5 and 0.50 for k(c) = 0 : 1 0, respectively. Both the measured ME voltage coefficient alpha(v) and optimum thickness ratio containing k(c) agree well with the corresponding theoretical predictions. The relationship between the optimum thickness ratios under two different mechanical loads remains unchanged, i.e., the measured optimum thickness ratio for k(c) = 0 : 1 5 is larger than for k(c) = 0.10. The experimental results verify the reasonability and correctness of the introduction of k(c) in the modified equivalent circuit model. The possible reasons for different interface coupling factors under different loads are also qualitatively discussed in this paper.

Natural Characteristics of Hard-Coating Damping Plates with Magnetic and Electric Effects

High-frequency Permeability Spectra of FeCoSiN/Al2O3 Laminated Films: Tuning of Damping by Magnetic Couplings Dependent on the Thickness of Each Ferromagnetic Layer

Multi-field Coupling Behavior of Simply-Supported Conductive Plate under the Condition of a Transverse Strong Impulsive Magnetic Field

Magnetic Damping Analysis of Magnetoelastic Coupling Interactions for Cantilever Conductive Thin Plate

Analytical Modeling of Hard-Coating Cantilever Composite Plate Considering the Material Nonlinearity of Hard Coating

Analysis of Nonlinear Vibration of Hard Coating Thin Plate by Finite Element Iteration Method

Static and dynamic performances of sandwich plates with magnetorheological elastomer core: Theoretical and experimental studies

A nonlinear analytical model of composite plate structure with an MRE function layer considering internal magnetic and temperature fields

Nonlinear analysis of rectangular magnetoelectroelastic moderately thick laminated plates under multi-field coupling loads

Vibration Analysis and Damping Effect of Blade-Hard Coating Composite Structure Based on Base Excitation

Homogenized and Localized Responses of Coated Magnetostrictive Porous Materials and Structures

Theoretical Modeling of Frequency-Dependent Magnetoelectric Effects in Laminated Multiferroic Plates

Magnetoelectric Coupling In Multiferroic Laminated Plates With Giant Magnetostrictive Material Layers

Free Vibration of Size-Dependent Magneto-Electro-elastic Nanoplates Based on the Nonlocal Theory

Thermal forced vibration of magneto-electro-elastic sandwich plate with penta-graphene core

Two-Dimensional Analysis of Magnetoelectric Effects in Multiferroic Laminated Plates

Equivalent circuit model for plate type magnetoelectric laminate composite considering an interface coupling factor

Numerical modeling of the magnetoelectric effect in magnetostrictive piezoelectric bilayers

Magnetic Damping in Perpendicular [pt/co]3/mnir Multilayers

Free vibration and nonlinear dynamic behaviors of the imperfect smart electric magnetic FG-laminated composite panel in a hygrothermal environments

Magnetoelectric Effects in Laminated Multiferroic Shells