Abstract:Boundary Singularity Method (BSM) was used to model Chemical Vapor Infiltration (CVI) in a fibrous preform. Straight, long fibers of varying cross-sectional geometry, representing fibers of a preform, were placed within a domain of a pre-determined size. The preparation of dense fiber-reinforced Silicon-Carbon (SiC) composites was considered as a representative of CVI methodology, where methyl-trichlorosilane (MTS) was used as both the silicon and carbon donor for the silicon carbide matrix. Concentrations of MTS were then set at the domain boundaries, and the domain was gradually infiltrated with MTS as time progressed. The concentration of MTS at the surface of the preform fibers was calculated using the adopted BSM. For quasi-equilibrium considered, the reaction rate at solid surface is equal to the diffusion rate towards the surface. The Robin or third type boundary condition, which is a linear combination of the values of a function and the values of its derivative on the boundary of the domain, are developed and implemented to BSM. From the fibers surface concentrations obtained by BSM, deposition rates were calculated, and the geometry was updated to reflect the fiber growth during the time step, therefore, the fiber size growth and pore filling was modeled over time. The BSM analysis was verified by comparisons to a known analytical solution of concentric cylinders with a concentration set at the outer cylinder and a reaction at the inner. BSM solutions were also compared to experimental data as well as computational results obtained by a Level-Set Method (LSM). Obtained dynamics of pore size and location will help to evaluate quality of material manufactured by CVI. Porosity transients were obtained to show the relation between initial and current porosities as time progresses.

Modeling of Pore Structure Evolution Within the Fiber Bundle During Chemical Vapor Infiltration Process

Non-Uniform Capillary Model for Unidirectional Fiber Bundles Considering Pore Size Distribution

Robust Numerical Simulation of Porosity Evolution in Chemical Vapor Infiltration III: Three Space Dimension

Modeling of Pore Structures and Calculation of Gas Transport for Three Dimensional Carbon Fabric Structure Perform

A Two-Process Model for Study of the Effect of Fiber Preform Structure on Isothermal Chemical Vapor Infiltration of Silicon Carbide Matrix Composites

Prediction of Permeability for Chemical Vapor Infiltration

Modeling of Gas Transport and Calculation During CVI Processing

Modeling and Simulation of Fiber Reinforced Polymer Mold Filling Process by Level Set Method

Modeling of Thermal Conductivity of CVI-Densified Composites at Fiber and Bundle Level

Flow Field Simulation of Isothermal Chemical Vapor Infiltration for Manufacturing Carbon/Carbon Composites

Modeling of chemical vapor infiltration process for fabrication of carbon–carbon composites by finite difference methods

Modeling of Gas Phase Diffusion Transport During Chemical Vapor Infiltration Process

Modeling of Forced Flow-thermal Gradient CVI: Effects of Control Parameters and Processing Schemes on a Densification

Characterization and Diffusion in Reconstructed Gas Diffusion Layer Based on Stochastic Method

Numerical Simulation of Isothermal Chemical Vapor Infiltration Process for Fabrication of C/Sic Composites

Pore-scale Modeling of Gas Diffusion Layers: Investigation of Gas-Liquid Two-Phase Transport Properties

Relationship between temperature distribution and flow quantity of gas in FCVI

Wetting Dynamics of Spontaneous Imbibition in Porous Media: from Pore Scale to Darcy Scale

Dynamic Simulation of Fiber Orientation in Mold Filling Process in a Complex Cavity

Modeling of Chemical Vapor Infiltration Using Boundary Singularity Method

A Numerical Study of Densification Behavior of Silicon Carbide Matrix Composites in Isothermal Chemical Vapor Infiltration