Abstract:The temperature evolution, stress evolution, and dendrite growth during the laser metal deposition (LMD) process of Inconel 718 alloy were simulated using a multi-scale model that combines the finite element method and the Cellular Automata (CA) method. This model established the relationship between the thermal behavior of the molten pool and the solidification characteristics, and predicted the morphological size of the solidified structure. Research indicates that under conditions of higher cooling rate and lower shape control factor, equiaxed grains are prone to form, with a lower degree of elemental segregation in this region, which is conducive to the precipitation of granular Laves phase. Conversely, under conditions of lower cooling rate and higher shape control factor, columnar grains are more likely to form, with a higher degree of elemental segregation in this region, leading to the precipitation of chain-like Laves phase. The results of thermo-mechanical coupled simulation suggest that the maximum transient thermal stress is located at the overlap position, and when the component cools down to room temperature, the maximum normal stress along the scanning direction is observed. Dendritic growth results demonstrate that during the equiaxed grain growth process in the top region of the melt pool, the released solute is constrained by time and space, leading to the accumulation of solute and the formation of interdendritic segregation. In areas with a higher grain density, the solute accumulation zones overlap, resulting in an increase in solute concentration, which inhibits dendrite growth. In the middle region of the melt pool, during the columnar grain growth process, the solute concentration in the gaps between adjacent grains continuously increases, resulting in micro-segregation phenomena. Experimental measurements have shown that the temperature field's melt pool morphology, stress values along the scanning path, and dendritic morphology are in good agreement with the experimental outcomes.

Microstructural Changes in A Laser Solid Forming Inconel 718 Superalloy Thin Wall in the Deposition Direction

Microstructural Evolution of Laser Solid Forming Inconel 718 Superalloy under Different Laser Power

Thermodynamic Behavior and Microstructure Evolution of Inconel 718 Alloy by Laser Metal Deposition

The Crystal Growth, Intercellular Spacing and Microsegregation of Selective Laser Melted Inconel 718 Superalloy

The microstructural evolution and mechanical response of laser direct energy deposition Inconel 718 alloy based on simulation and experimental methods

Study on the Element Segregation and Laves Phase Formation in the Laser Metal Deposited IN718 Superalloy by Flat Top Laser and Gaussian Distribution Laser

The effect of interval pulsed laser deposition on the microstructure and mechanical properties of Inconel 718 parts using laser directed energy deposition

Investigation of Dendritic Growth and Liquation Cracking in Laser Melting Deposited Inconel 718 at Different Laser Input Angles

Mechanical properties and microstructure evolution of selective laser melting Inconel 718 along building direction and sectional dimension

Electrochemical dissolution behavior of heat treated laser solid formed Inconel718

Investigation On The Microstructure And Segregation Of Superalloy Fgh96 By Direct Laser Forming

The δ Phase Precipitation of an Inconel 718 Superalloy Fabricated by Electromagnetic Stirring Assisted Laser Solid Forming

Microstructure and mechanical property comparison of Inconel alloys fabricated using micro and conventional laser powder bed fusion

Effect of heat treatment on microstructure, precipitation behavior and mechanical properties of Inconel 718 fabricated by laser direct energy deposition

Effect of Ultrasonic Vibration and Heat Treatment on Microstructure and Mechanical Properties of IN718 Superalloy by Laser Direct Forming

Effect of Laser Energy Density on the Microstructure and Microhardness of Inconel 718 Alloy Fabricated by Selective Laser Melting

Effects of Process Parameters and Heat Treatment on Microstructure and Mechanical Characteristics of Laser Powder Bed Fusion Alloy Inconel 718

Epitaxy and New Stray Grain Formation Mechanism During Epitaxial Laser Melting Deposition of Inconel 718 on Directionally Solidified Nickel-Based Superalloys

Influence of pulsed laser scanning patterns on microstructural evolution and mechanical properties of Inconel 718 in direct laser deposition

Influence of Build Orientation on Microstructure, Mechanical and Corrosion Behavior of Inconel 718 Processed by Selective Laser Melting

Mechanical Characterization of Near-Isotropic Inconel 718 Fabricated by Laser Powder-Bed Fusion