Abstract:Fe/S-bearing erdite flocculant has been proven to be effective in the precipitation of heavy metals from real electroplating wastewater, with the only drawback being the huge production of sludge. This sludge was rich in Fe/S/Zn/Cu/Ni and refractory to be recycled due to the extractant pollution by free Fe and the dissolution of sulphide. Herein, a multistep separation method was developed to dissolve sulphide and separate Fe prior to Zn/Cu/Ni. Results showed that more than 92% sludge was dissolved as Fe/Zn/Cu/Ni-rich leachate after the sludge was leached by nitric acid, with the rest of the remaining undissolved elemental sulphurs. When the leachate was directly extracted by using commercially extractant Acorga M5640 and Di-(2-ethylhexyl) phosphoric acid (P204), Fe was complexed by the phosphate group of the extractant. The Fe was effectively removed prior to Zn/Cu/Ni to avoid the extractant pollution. The Fe removal efficiency was only 38.34% without sucrose, but it rose to 99.94% with the addition of 0.5 g sucrose. The added sucrose reacted with nitrate to consume H+, which showed a similar rate to the H+ release from Fe hydrolysis. Thereafter, the Fe hydrolysis was continued to remove, the Fe at a high level. The removed Fe was in the form of high-purified hematite nanorod with a diameter and length of 300-600 nm and 0.5-2.5 μm, respectively. After Fe removal, Cu/Zn/Ni was extracted by using Acorga M5640 and P204 to form three halite, including a mixture of copper sulphate hydrate and bonattite (96.8% CuSO4·H2O/CuSO4·3H2O), gunningite (97.5% ZnSO4·H2O) and dwornikite (97.9% NiSO4·H2O). The rest of the solution was neutralised by lime water to remove sulphate as gypsum (95.9% CaSO4) to meet the discharge standard of the electroplating industry. In summary, the recycling efficiency of Fe/Cu/Zn/Ni from the sludge reached 94.4%, 92.6%, 94.7% and 95.3%, which provided an alternative strategy to resource utilise Fe/S-bearing solid waste.

Reduction of Heavy Metals in Residues from the Dismantling of Waste Electrical and Electronic Equipment Before Incineration

Volatilization of Zn and Pb and Preparation of Integrated Micro-Electrolysis Filter from Copper Slag and Its Application for Removing Cr(VI) from Aqueous Solution.

Removal of Heavy Metals from Sewage Sludge with a Combination of Bioleaching and Electrokinetic Remediation Technology

Chemical Speciation Distribution and Thermal Stability of Heavy Metals along Flue Gas Cleaning Systems in a Hazardous Waste Incinerator

Separation of Metals from Ni-Cu-Ag-Pd-Bi-Sn Multi-Metal System of E-Waste by Leaching and Stepwise Potential-Controlled Electrodeposition.

Co-high-efficiency washing agents for simultaneous removal of Cd, Pb and As from smelting soil with risk assessment

Removal of Heavy Metals from Municipal Solid Waste Incineration (mswi) Fly Ash by Traditional and Microwave Acid Extraction

Treating waste with waste: Metals recovery from electroplating sludge using spent cathode carbon combustion dust and copper refining slag

Partitioning of Heavy Metals in Municipal Solid Waste Pyrolysis, Gasification, and Incineration

Clean hydrometallurgical route for highly efficient decontamination and recycling of multiple heavy metals from hazardous Pb smelting residues: Multi-objective leaching optimization, adsorption, and risk assessment

Effect of Water-Washing on the Co-Removal of Chlorine and Heavy Metals in Air Pollution Control Residue from MSW Incineration.

Reduction of heavy metal emissions by adding modified attapulgite to sludge in bubbling fluidized bed incineration process

Stepwise recycling of Fe, Cu, Zn and Ni from real electroplating sludge via coupled acidic leaching and hydrothermal and extraction routes

Effective disposal of hazardous waste from non-ferrous waste recycling through thermal treatment

Green Process of Metal Recycling: Coprocessing Waste Printed Circuit Boards and Spent Tin Stripping Solution

Reduction and Resource of Copper in the Hazardous Waste Incineration Residues

Liquid-liquid hierarchical separation and metal recycling of waste printed circuit boards

Removal of heavy metals from fly ash using electrodialysis driven by a bioelectrochemical system: a case study of Pb, Mn, Cu and Cd

A metallurgical approach for separation and recovery of Cu, Cr, and Ni from electroplating sludge

Hydrometallurgical detoxification and recycling of electric arc furnace dust

Characterization of Residues from Dismantled Imported Wastes