Abstract:To achieve greater hydrophilicity and improved antifouling ability, an ultrafiltration (UF) membrane was modified using a surface coating of raw and functionalized multi-walled carbon nanotubes (MWCNTs). Initially, raw MWCNTs were chemically treated to prepare MWCNTs with carboxylic groups (MWCNTs-COOH) and MWCNTs with polyethylene glycol groups (MWCNTs-PEG), and their physicochemical properties were systematically characterized. The results indicated that the MWCNTs-COOH exhibited the strongest negative charge among the three investigated MWCNTs, whereas the MWCNTs-PEG exhibited the best dispersion ability. Subsequently, the UF membranes were coated with the three MWCNTs, and the surface morphologies and permeability of the modified membranes under different transmembrane pressure (TMP) levels were compared. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) images demonstrated that the modified membranes had a rougher surface than the virgin membrane because of the modification layer of MWCNTs. The pure water flux values of all the modified membranes were slightly reduced in comparison with that of the virgin membrane, but the flux sacrifice was very minor. Three natural organic matter (NOM) models, humic acid (HA), bovine serum albumin (BSA) and sodium alginate (SA), were employed to investigate the antifouling potentials of the membranes. The modified membranes exhibited strikingly improved antifouling properties compared with those of virgin membrane for all of the tested NOM foulants, which was probably a consequence of the decreased direct membrane–foulant contact due to the MWCNT coating layer. In addition, decreased surface negative charge and increased surface roughness were two important factors contributing to the enhanced antifouling properties. The r-membranes and the COOH-membrane exhibited satisfactory stabilities during pure-water backwashing at TMP of 60kPa, with dislodged ratios of 1.9% and 4.54%.

The surface modification of coal-based carbon membranes by different acids

Preparation and Modification of Ceramic Membrane and Its Application in Oil/Water Wastewater Treatment

Improving the Performance of Polyamide Reverse Osmosis Membrane by Incorporation of Modified Multi-Walled Carbon Nanotubes

Fabrication of High-Flux PTFE Hollow Fiber Membranes Through Nonionic Surfactant Infiltration Coupled with Mussel-Inspired Chemistry Coating

Chemical Modification Effect of Compound Solutions of Surfactants with Acetic Acid on Coal Pores

Surface modification of polypropylene microporous membrane to improve its antifouling property in MBR: CO2 plasma treatment

Surface Modification of Polypropylene Macroporous Membrane to Improve Its Antifouling Characteristics in a Submerged Membrane-Bioreactor: H(2)O Plasma Treatment.

Fabrication and Characterization of Superhydrophobic Polypropylene Hollow Fiber Membranes for Carbon Dioxide Absorption

Surface synthesis of a polyethylene glutaraldehyde coating for improving the oil removal from wastewater of microfiltration carbon membranes

Surface modification of UF membranes with functionalized MWCNTs to control membrane fouling by NOM fractions

Systematic Evaluation of TiO2-GO-modified Ceramic Membranes for Water Treatment: Retention Properties and Fouling Mechanisms

Improving the Filtration Performance of Zro2 Membrane in Non-Polar Organic Solvents by Surface Hydrophobic Modification

A method for alkali hydrolysis modification of PAN/PES/TiO2 composite ultrafiltration membranes

Improving Permeability and Fouling Resistance of GO Hydrophilic/hydrophobic Janus Membrane by Polyether Amine Crosslinking for Membrane Distillation of Dye Wastewater

Mechanism of organic fouling in the reverse osmosis process of coal chemical wastewater

Study on TiO_2 Dynamically Modified Membrane Used in Membrane Bioreactor

Fabrication of Tween-20 Coated PVDF Membranes for Wastewater Treatment: Optimization of Preparation Parameters, Removal and Membrane Fouling Control Performance

Facile preparation of robust anti-wetting membrane by simple two-step FeOOH and fluorosilane membrane modification

Anti-fouling membranes by manipulating surface wettability and their anti-fouling mechanism

Highly efficient removal of emulsified oil from oily wastewater by microfiltration carbon membranes made from phenolic resin/coal

Surface Modification of Polyethylene Membrane by Adsorption of Tween 20 to Improve Antifouling Characteristics in a Bioreactor