Electro-generation of Hydrogen Peroxide by an Activated Carbon Fiber Cathode:Influencing Factors and Mechanisms

贺文静,兰华春,赵旭,王爱民,刘锐平,王英伟

DOI: https://doi.org/10.13671/j.hjkxxb.2013.03.015

2013-01-01

Abstract:Electro-generation of hydrogen peroxide(H2O2) was achieved in an electrochemical system with the activated carbon fiber(ACF) and RuO2/Ti mesh as cathode and anode,respectively.Na2SO4 solution was used as supporting electrolyte.The effects of current intensity,initial pH and the dissolved oxygen content on the H2O2 generation were investigated in details.Results indicated that the generated amount of H2O2 increased with the applied current ranging from 0.12 to 0.50 A,and remained nearly constant after 60 min.When pH ranged from 2.0 to 6.0,concentrations of the generated H2O2 were higher than 500 μmol · L-1,with the maximum of 575.8 μmol · L-1 when pH was 2.0.The production amount of H2O2 increased with the dissolved oxygen content.Without the addition of oxygen,high concentration of H2O2 was still generated by the dissolved oxygen at the anode.The above results suggested that the ACF electrode with a large surface area is a suitable cathode in the electro-Fenton process.