Abstract:Mid-infrared band 3–5 \begin{document}${\text{μm}}$\end{document} laser light source has important applications in many fields such as medical treatment, basic science, communication, and industry. Owing to the limitation to available efficient gain media in the mid-infrared band, the traditional methods of generating and amplifying lasers , such as regenerative amplification, are no longer applicable. In order to produce broadband and high-energy mid-infrared laser, in this work we combine quasi-phase matching technology and chirped periodically polarized lithium niobate (CPPLN) crystal for theoretical analysis and numerical design. The second-order nonlinear difference-frequency generation (DFG) process is used to implement the generation of mid-infrared laser via CPPLN. In the differential frequency process, the pump light used is 800 nm in wavelength and the wavelength range of signal light is 0.95–1.6 \begin{document}${\text{μm}}$\end{document}. By calculating the dispersion curve of CPPLN crystal, the phase mismatch of difference frequency generation processes with different light signals is obtained. Under the condition of quasi-phase matching, the CPPLN with deliberately poling structures is designed and used to provide phase mismatch compensation in a broad bandwidth. The designed structure can meet the generation of mid infrared laser in a 1.6–5\begin{document}$ {\text{μm}} $\end{document} band according to the numerical simulations. The conversion efficiencies of mid-infrared laser with different wavelengths at different positions in the crystal are obtained by using nonlinear coupled wave equations and fourth-order Runge-Kutta method. The results show that the mid-infrared laser in a wavelength range of 1.6–5 \begin{document}$ {\text{μm}} $\end{document} can be produced efficiently in a single CPPLN crystal, with an average conversion efficiency of about 15%. The theoretical analysis and numerical simulation for the designed CPPLN crystal can provide good schematic reference and theoretical support for further experimental exploration on generation of mid-infrared laser.

Multiwavelength Midinfrared Difference Frequency Generation Based on A Uniform Grating Periodically Poled Lithium Niobate

Mid-IR Dual-Wavelength Difference Frequency Generation in Uniform Grating PPLN Using Index Dispersion Control

Widely tunable mid-IR difference-frequency generation based on fiber lasers.

Study of quasi-phase matching wavelength acceptance bandwidth for periodically poled LiNbO3 crystal-based difference-frequency generation

A Broadly Tunable Mid-Infrared Laser System Based on Difference Frequency Generation in Periodically Poled Lithium Niobate

Highly-Efficient Pulsed Mid-Infrared Generation Based on Intracavity Difference Frequency Mixing

Mid-IR difference-frequency generation in OP-GaAs inside the cavity of a narrow-band nanosecond PPLN optical parametric oscillator

Ultra-broadband and Ultra-High Conversion Efficiency Difference Frequency Generation in a Dual-Layer Thin-Film LiNbO3 Waveguide with Reversed Ferroelectric Domain Orientations

Widely Phase-Matched Tunable Difference-Frequency Generation in Periodically Poled LiNbO3 Crystal

Broadband Mid-IR Light Sources From Difference Frequency Generators Based on a 2-mm-Long Aperiodically-Poled Lithium-Niobate Crystal

Widely Tunable Difference Frequency Generation Around 3.4 Μm Using Index Dispersion Property of PPLN

Nanosecond Optical Parametric Oscillator with Midinfrared Intracavity Difference-Frequency Mixing in Orientation-Patterned GaAs.

Tunable phase-mismatched mid-infrared difference-frequency generation between 6 and 17?m in CdTe

Difference Frequency Generation Wildly Tunable Continuous Wave Mid-infrared Radiation Laser Source Based on a MgO ∶ PPLN Crystal

Multiwavelength Mid-Infrared Laser Generation Based on Optical Parametric Oscillation and Intracavity Difference Frequency Generation

Wavelength Tunable Picosecond Pulse Bunch Laser Around 3 Μm Through PPMgLN –based DFG with Temperature Insensitive High Power Scaling

Compact and Tunable Mid-IR Light Source Based on a Dual-Wavelength Fiber Laser

Intra-pulse Difference-Frequency Generation of Mid-Infrared (27–20 Μm) by Random Quasi-Phase-matching

Broadband Infrared (2.7–20 Μm) Generation Via Random Quasi-Phase-Matched Intra-Pulse Difference-Frequency Generation

Dual-Wavelength Mid-Infrared Generation Using Intracavity Stimulated Raman Scattering of PPLN

Structure Design and Numerical Simulation of Chirped Periodically Polarized Lithium Niobate Crystal for Broadband Mid-Infrared Laser Generation