Abstract:Mid-infrared band 3–5 \begin{document}${\text{μm}}$\end{document} laser light source has important applications in many fields such as medical treatment, basic science, communication, and industry. Owing to the limitation to available efficient gain media in the mid-infrared band, the traditional methods of generating and amplifying lasers , such as regenerative amplification, are no longer applicable. In order to produce broadband and high-energy mid-infrared laser, in this work we combine quasi-phase matching technology and chirped periodically polarized lithium niobate (CPPLN) crystal for theoretical analysis and numerical design. The second-order nonlinear difference-frequency generation (DFG) process is used to implement the generation of mid-infrared laser via CPPLN. In the differential frequency process, the pump light used is 800 nm in wavelength and the wavelength range of signal light is 0.95–1.6 \begin{document}${\text{μm}}$\end{document}. By calculating the dispersion curve of CPPLN crystal, the phase mismatch of difference frequency generation processes with different light signals is obtained. Under the condition of quasi-phase matching, the CPPLN with deliberately poling structures is designed and used to provide phase mismatch compensation in a broad bandwidth. The designed structure can meet the generation of mid infrared laser in a 1.6–5\begin{document}$ {\text{μm}} $\end{document} band according to the numerical simulations. The conversion efficiencies of mid-infrared laser with different wavelengths at different positions in the crystal are obtained by using nonlinear coupled wave equations and fourth-order Runge-Kutta method. The results show that the mid-infrared laser in a wavelength range of 1.6–5 \begin{document}$ {\text{μm}} $\end{document} can be produced efficiently in a single CPPLN crystal, with an average conversion efficiency of about 15%. The theoretical analysis and numerical simulation for the designed CPPLN crystal can provide good schematic reference and theoretical support for further experimental exploration on generation of mid-infrared laser.

Widely Phase-Matched Tunable Difference-Frequency Generation in Periodically Poled LiNbO3 Crystal

A Broadly Tunable Mid-Infrared Laser System Based on Difference Frequency Generation in Periodically Poled Lithium Niobate

Widely tunable mid-IR difference-frequency generation based on fiber lasers.

Study of quasi-phase matching wavelength acceptance bandwidth for periodically poled LiNbO3 crystal-based difference-frequency generation

[Difference-Frequency Generation in PPLN and Water Vapor Detection in Air].

Broadband difference frequency generation around 4.2μm at overlapped phase-match conditions

Broadband Mid-IR Light Sources From Difference Frequency Generators Based on a 2-mm-Long Aperiodically-Poled Lithium-Niobate Crystal

Temperature Tunable Infrared Optical Parametric Oscillator with Periodically Poled LiNbO3

Improvement to Sellmeier equation for periodically poled LiNbO3 crystal using mid-infrared difference-frequency generation

Multiwavelength Midinfrared Difference Frequency Generation Based on A Uniform Grating Periodically Poled Lithium Niobate

Difference Frequency Generation Wildly Tunable Continuous Wave Mid-infrared Radiation Laser Source Based on a MgO ∶ PPLN Crystal

Widely and Continuously Tunable Optical Parametric Generator Based on Mgo-Doped Periodically Poled Linbo3 Crystal

A Periodically Poled LiNbO3 Optical Parametric Generator in Wavelength Conversion from 2 to 3.88~4.34 \Mum

Mid-IR Dual-Wavelength Difference Frequency Generation in Uniform Grating PPLN Using Index Dispersion Control

Structure Design and Numerical Simulation of Chirped Periodically Polarized Lithium Niobate Crystal for Broadband Mid-Infrared Laser Generation

Mid-Infrared Optical Parametric Oscillator Based on All-Solid-State-Pumped Periodically Poled LiNbO

Tunable and Coherent Nanosecond 7.2–12.2 Μm Mid-Infrared Generation Based on Difference Frequency Mixing in ZnGeP 2 Crystal

Widely Tunable Difference Frequency Generation Around 3.4 Μm Using Index Dispersion Property of PPLN

Temperature Tunable Infrared Optical Parametric Generation Based on Periodically Poled MgO:LiNbO 3 Crystals

Ultrabroadband Tunable Continuous-Wave Difference-Frequency Generation In Periodically Poled Lithium Niobate Waveguides

Wavelength Tunable Picosecond Pulse Bunch Laser Around 3 Μm Through PPMgLN –based DFG with Temperature Insensitive High Power Scaling