Abstract:Abstract. In this paper, a synthesis method is proposed for the 5-point-contact four-bar linkage that approximates a straight line with given angle parameters. The given parameters were the angles and the location of the Ball point. Synthesis equations were derived for a general Ball–Burmester point case, the Ball–Burmester point at an inflection pole, and the Ball point that coincided with two Burmester points, resulting in three respective groups of bar linkages. Next, taking Ball–Burmester point as the coupler point, two out of the three bar-linkage combinations were used to generate three four-bar mechanisms that shared the same portion of a rectilinear trajectory. Computation examples were presented, and nine cognate straight-line mechanisms were obtained based on the Roberts-Chebyshev theory. Considering that the given parameters were angles which was arbitrarily chosen, with the other two serving as the horizontal and vertical axes, so the solution region graphs of the solutions for three mechanism configurations were plotted. Based on these graphs, the distribution of the mechanism attributes was obtained with high efficiency. By imposing constraints, the optimum mechanism solution was straightforwardly identified by the designers. For the angular parameters prescribed in this paper, the solutions for three straight-line mechanism configurations were obtained, along with nine cognate straight-line mechanisms that shared the same portion of the rectilinear trajectory. All the fixed pivot installation locations and motion performances differed, thus providing multiple solutions to the trajectory of the synthesis of mechanisms.

Applying Constraint Satisfaction Methods in Four-Bar Linkage Design

Design Framework for Motion Generation of Planar Four-Bar Linkage Considering Clearance Joints and Dynamics Performance

Research on Web-Based Optimization for Path Generation Synthesis of Planar Four-Bar Linkage

Optimal Synthesis of Four-Bar Linkage Path Generation through Evolutionary Computation with a Novel Constraint Handling Technique

Computer aided design of a single degree-of-freedom six-bar mechanism via Monte Carlo layered optimization method

Synthesis Theory and Optimum Design of Four-bar Linkage with Given Angle Parameters

Constraint handling technique for four-bar linkage path generation using self-adaptive teaching–learning-based optimization with a diversity archive

A Cerebellar Operant Conditioning-Inspired Constraint Satisfaction Approach for Product Design Concept Generation

Computer-Aided Synthesis of Linkage-Type Straight-Line and Dwell Mechanisms

The Application of Constraint Satisfaction Technique in Conflict Detection and Resolution

New approach for mechanism synthesis based on the chaotic property of Newton iteration

Deep generative model-based synthesis framework of four-bar linkage mechanisms with target conditions

Synchronous design method of stiffness and topology for parallel flexible mechanisms with various joints

The Synthesis of Planar Four-Bar Linkage for Mixed Motion and Function Generation

Topology optimization of linkage mechanisms using spring-connected link model

Internet-based collaborative design approach with constraint management

Comprehensive approach for the dimensional synthesis of a four-bar linkage based on path assessment and reformulating the error function

K-WFA Based Kinematic Scheme Design Solving of Mechanical Product

Design of compliant mechanisms: An explicit topology optimization method using end-constrained spline curves with variable width

Kinematic modeling and optimal design of a partially compliant four-bar linkage using elliptic integral solution

An Improved Fourier-Based Method for Path Generation of Planar Four-Bar Linkages without Prescribed Timing