Abstract:The rapid solidification kinetics of undercooled hypoperitectic Fe59Th41 alloy was quantitatively investigated by electrostatic levitation (ESL) and electromagnetic levitation (EML) methods Combined with a high-speed photography technique. The maximum undercoolings Delta T obtained by ESL and EML methods were 200 K (0.12 T-L) and 315 K (0.19 T-L), respectively. Double recalescence processes corresponding to the primary dendrite growth and subsequent peritectic reaction were recorded at various undercoolings. The dependence of primary dendrite growth velocity V on the undercooling Delta T satisfied a double exponential relation. A longest incubation time and a highest undercooling of peritectic reaction were experimentally determined at the same critical undercooling of about 86 K. In contrast, the peritectic reaction time decreased linearly with enhanced Delta T. As Delta T rised in ESL and EML experiments, primary Fe2Ti phase successively appeared as well-defined coarse dendrites, greatly refined dendrites and finally evolved into a maze-like morphology composed of vermicular dendrites. Meanwhile, the layer thickness and volume fraction of peritectic FeTi phase remarkably reduced, which suggested that peritectic reaction was suppressed to some extent. The solid solubilities of Fe2Ti and FeTi phases were significantly extended during rapid solidification. As another comparison, drop tube experiment was also conducted to explore the solidification behaviors under larger undercoolings and cooling rates. A mechanism transition of 'peritectic solidification -> metastable coupled-growth between primary and peritectic phases' was observed with decreasing alloy droplet size. (C) 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Temperature field analysis of 430 ferrite stainless steel during solidification based on 3 D-CAFE method

Liquid Phase Separation and Subsequent Dendritic Solidification of Ternaryfe35cu35si30alloy

Simulation of Isothermal Solidification of Ternary Alloy with Phase-Field Model

On terrace phenomenon of heat-stagnation curve for 23Co14Ni12Cr3 steel

Numerical Simulation of Three-dimensional Temperature Field in Laser Melting Process

Phase-field Simulation of Effect of Phase-field Parameters on Solidification Process of Multicomponent Alloys

A Triple Comparative Study of Primary Dendrite Growth and Peritectic Solidification Mechanism for Undercooled Liquid Fe59ti41 Alloy

Phase-field Simulation of Isothermal Solidification of Ternary Alloy Based on KKS Model

Numerical Simulation of Solidification and Macrosegregation in Water Cooled Heavy Steel Ingot

Simulation of Temperature Field in the Solidification Process of Cast

Three-dimensional simulation of thermosolutal convection and macrosegregation in steel ingots

Effect of Cooling Rates on the Local—Overall Morphology Characteristics of Solidification Structure at Different Stages for High Carbon Steel

Effect of Cooling Rate on the Grain Morphology and Element Segregation Behavior of Fe-Mn-Al-C Low-Density Steel During Solidification

Numerical Simulation of Temperature Field for Investment Casting Solidification Process

Numerical Simulation on Fluid Flow, Heat and Mass Transfer in Solidification of Fe-C Alloys

Influences of Cooling Rates on Solidification and Segregation Characteristics of Fe-Cr-Ni-Mo-N Super Austenitic Stainless Steel

FEM ANALYSIS ON THE TEMPERATURE FIELDDURING COMPOSITE TUBE LIQUID-SOLIDEXTRUSION FORMING PROCESS

Investigation of Massive Ferrite in an Interstitial-Free Steel

Application of thermal analysis in solidification process of undercooled Fe-B alloy

Numerical simulation of macro-segregation in steel ingot during solidification

Numerical Simulation of Temperature Field During Solidification of High Carbon Cast Steel Based on ANSYS