Abstract:In order to predict flow behavior and find the optimum hot working processing parameters for 5754 aluminum alloy, the experimental flow stress data obtained from the isothermal hot compression tests on a Gleeble-3500 thermo-simulation apparatus, with different strain rates (0.1⁻10 s⁻1) and temperatures (300⁻500 &deg;C), were used to construct the constitutive models of the strain-compensation Arrhenius (SA) and back propagation (BP) artificial neural network (ANN). In addition, an optimized BP⁻ANN model based on the genetic algorithm (GA) was established. Furthermore, the predictability of the three models was evaluated by the statistical indicators, including the correlation coefficient (R) and average absolute relative error (AARE). The results showed that the R of the SA model, BP⁻ANN model, and ANN⁻GA model were 0.9918, 0.9929, and 0.9999, respectively, while the AARE of these models was found to be 3.2499⁻5.6774%, 0.0567⁻5.4436% and 0.0232⁻1.0485%, respectively. The prediction error of the SA model was high at 400 &deg;C. It was more accurate to use the BP⁻ANN model to determine the flow behavior compared to the SA model. However, the BP⁻ANN model had more instability at 300 &deg;C and a true strain in the range of 0.4⁻0.6. When compared with the SA model and BP⁻ANN model, the ANN⁻GA model had a more efficient and more accurate prediction ability during the whole deformation process. Furthermore, the dynamic softening characteristic was analyzed by the flow curves. All curves showed that 5754 aluminum alloy showed the typical rheological characteristics. The flow stress rose rapidly with increasing strain until it reached a peak. After this, the flow stress remained constant, which demonstrates a steady flow softening phenomenon. Besides, the flow stress and the required variables to reach the steady state deformation increased with increasing strain rate and decreasing temperature.

Prediction of Contact Fatigue Life of Alloy Cast Steel Rolls Using Back-Propagation Neural Network

Ultra-low Cycle Fatigue Life Prediction of Stainless Steel Based on Transfer Learning Guided Artificial Neural Network

Mechanical Properties Prediction for Hot Rolled Alloy Steel Using Convolutional Neural Network.

Artificial neural network approach for mechanical properties prediction of as-cast A380 aluminum alloy

Predicting the Low‐cycle Fatigue Life of Ti‐6Al‐4V Alloy Using Backpropagation Neural Network Optimized by the Improved Dung Beetle Algorithm

[Are tick medications pesticides? Implications for health and risk perception for workers in the dairy cattle sector].

Artificial Neural Network Prediction on Wear Properties of High Vanadium High Speed Steel (hvhss) Rolls

A Novel Neural Network-based Alloy Design Strategy: Gated Recurrent Unit Machine Learning Modeling Integrated with Orthogonal Experiment Design and Data Augmentation

A new data-driven probabilistic fatigue life prediction framework informed by experiments and multiscale simulation

Data-Enhanced Low-Cycle Fatigue Life Prediction Model Based on Nickel-Based Superalloys

Dynamic Behavior and Modified Artificial Neural Network Model for Predicting Flow Stress During Hot Deformation of Alloy 925

A Modified Back Propagation Artificial Neural Network Model Based on Genetic Algorithm to Predict the Flow Behavior of 5754 Aluminum Alloy

On the generalization capability of artificial neural networks used to estimate fretting fatigue life

An ANN Hardness Prediction Tool Based on a Finite Element Implementation of a Thermal–Metallurgical Model for Mild Steel Produced by WAAM

A Deep Neural Network Method for LCF Life Prediction of Metal Materials with Small Sample Experimental Data

On the development of error-trained BP-ANN technique with CDM model for the HCF life prediction of aluminum alloy

Artificial neural network prediction to the hot compressive deformation behavior of Al–Cu–Mg–Ag heat-resistant aluminum alloy

Design of a nickel-base superalloy using a neural network

High-Dimensional Data-Driven Optimal Design for Hot Strip Rolling of Microalloyed Steel

Towards an Optimized Artificial Neural Network for Predicting Flow Stress of In718 Alloys at High Temperatures

Multi-physics information-integrated neural network for fatigue life prediction of additively manufactured Hastelloy X superalloy