Abstract:In order to reduce the impedance and improve in vivo neural recording performance of our developed Michigan type silicon electrodes, rough-surfaced AuPt alloy nanoparticles with nanoporosity were deposited on gold microelectrode sites through electro-co-deposition of Au-Pt-Cu alloy nanoparticles, followed by chemical dealloying Cu. The AuPt alloy nanoparticles modified gold microelectrode sites were characterized by scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and in vivo neural recording experiment. The SEM images showed that the prepared AuPt alloy nanoparticles exhibited cauliflower-like shapes and possessed very rough surfaces with many different sizes of pores. Average impedance of rough-surfaced AuPt alloy nanoparticles modified sites was 0.23 MΩ at 1 kHz, which was only 4.7% of that of bare gold microelectrode sites (4.9 MΩ), and corresponding in vitro background noise in the range of 1 Hz to 7500 Hz decreased to 7.5 μ V rms from 34.1 μ V rms at bare gold microelectrode sites. Spontaneous spike signal recording was used to evaluate in vivo neural recording performance of modified microelectrode sites, and results showed that rough-surfaced AuPt alloy nanoparticles modified microelectrode sites exhibited higher average spike signal-to-noise ratio (SNR) of 4.8 in lateral globus pallidus (GPe) due to lower background noise compared to control microelectrodes. Electro-co-deposition of Au-Pt-Cu alloy nanoparticles combined with chemical dealloying Cu was a convenient way for increasing the effective surface area of microelectrode sites, which could reduce electrode impedance and improve the quality of in vivo spike signal recording.

Fabrication and characterization of Pt Archimedean-spiral interdigitated microelectrodes with containing trenches

Fabrication and characterization of au disk mircoelectrodes

Investigation of the Performance of Microelectrodes with Micrometer Size Structural Diameters

Fabrication of Nanometer-Sized Electrodes and Tips for Scanning Electrochemical Microscopy.

Fabrication of Bio-Microelectrodes for Deep-Brain Stimulation Using Microfabrication and Electroplating Process

Fabrication and Characterization of an Innovative Integrated Solid-State Microelectrode

Fabrication and Characterization of Piezoelectric Cantilever for Micro Transducers

Fabrication and Characterization of a Parylene-Based Three-Dimensional Microelectrode Array for Use in Retinal Prosthesis

Molecularly imprinted polymer amalgamation on narrow-gapped Archimedean-spiral interdigitated electrodes: resistance to electrolyte fouling in acidic medium

Fabrication and properties of 3D flexible parylene-based microelectrode array with silicon tips

Fabrication of Silicon-Based Template-Assisted Nanoelectrode Arrays and Ohmic Contact Properties Investigation.

Fabrication And Characterization Of In-Plane Polarized Pzt Films With Interdigital Electrodes

Fabrication of Microelectrode Arrays Using Microcontact Printing

Deep Reactive Ion Etching of PZT Ceramics and PMN-PT Single Crystals for High Frequency Ultrasound Transducers

Parylene-based Implantable Pt-black Coated Flexible 3-D Hemispherical Microelectrode Arrays for Improved Neural Interfaces

In Vivo Neural Recording and Electrochemical Performance of Microelectrode Arrays Modified by Rough-Surfaced AuPt Alloy Nanoparticles with Nanoporosity.

Multi-layered Domain Morphology in Relaxor Single Crystals with Nano-Patterned Composite Electrode

PtIr Microwire Bonding for Deep-Brain Microelectrode by Electroplating

Systematic electrochemical etching of various metal tips for tunneling spectroscopy and scanning probe microscopy

Fabrication, Characterization, and Analytical Application of Silica Nanopore Array-Modified Platinum Electrode.