Abstract:This article focuses on the high-performance motion control of an accumulator assistant fast forging hydraulic press. As the accumulator has a significant impact on the motion control performance of the fast forging hydraulic press, the dynamic and static characteristics of the accumulator are studied and a simplified mathematical model is applied in the motion controller design. To hold the nonlinear parameter uncertainty associated with the accumulator model, a nonlinear damping regulator and a nonlinear robust feedback are synthesized based on the simplified mathematical model. The virtual control law lumped flow is proposed to act as the equivalent input of the fast forging hydraulic press, which successfully solves the decoupling problem and makes the motion controller design feasible. And the most economical distribution scheme is finally applied to synthesize the actual control law for each fast forging valve. In consideration of the parametric uncertainties and uncertain nonlinearities appearing in the mathematical model of the accumulator assistant fast forging hydraulic press, the discontinuous projection-based adaptive robust control is extended to synthesize the motion controller. Both simulation and experiment results demonstrate that with the proposed motion controller, the transient performance and final tracking accuracy are guaranteed although the system is subjected to various model uncertainties coming from both parametric uncertainties and uncertain nonlinearities. Furthermore, with the proposed nonlinear damping regulator, the influence of the accumulator can be well compensated and the control performance is improved.

Rate-dependent Modeling and Adaptive Inverse Control of Giant Magnetostrictive Actuators

Precision Servo Control of GMA Based on Compounding Feedforward Compensation

Research on Control Method and Experiment for GMA's Precision Position Based on Predictive Model with Hysteresis

Inverse model–based iterative learning control on hysteresis in giant magnetostrictive actuator

Nonlinear Preisach Model and High Order Hystersis Modeling for Giant Magnetostrictive Actuator

Rate-Dependent Modeling and $\text{h}_{\mathrm {\infty }}$ Robust Control of GMA Based on Hammerstein Model with Preisach Operator

Rate-dependent Modeling and Control of GMA Based on Hammerstein Model with Preisach Operator

Adaptive Inverse Control for Parametric Strict Feedback Systems with Unknown Failures of Hysteretic Actuators

Experimental investigation on rate-dependent vibration control of giant magnetostrictive actuators

Sliding Mode Based Controller for Magnetostrictive Actuator

Adaptive Robust Motion Control of a Fast Forging Hydraulic Press Considering the Nonlinear Uncertain Accumulator Model.

Inverse Compensate and Control for GMA Hysteresis in Non-Circular Cutting

Modeling and control of giant magnetostrictive actuator based on a hammerstein-like model by using fuzzy tree method

A Model Reference Adaptive Sliding Mode Control for the Position Control of Permanent Magnet Synchronous Motor.

Hysteresis Compensation of Giant Magnetostrictive Actuator Based on Jiles-Atherton Model

Robust Control of Rate-Dependent Hysteresis in Smart Actuators

Research on Cascade Control Strategy for Thermal Management System of Giant Magnetostrictive Actuator

Dynamic Modeling and Trajectory Tracking Control of a Novel Muck-Removal Hydraulic Manipulator

Adaptive Inverse Control of Non-Linear Systems with Unknown Complex Hysteretic Non-Linearities

Real-time Compensation Control of Hysteresis Based on Prandtl-Ishlinskii Operator for GMA

High-Precision Position Tracking Control of Giant Magnetostrictive Actuators Using Fractional-Order Sliding Mode Control with Inverse Prandtl-Ishlinskii Compensator