Experiments and nonlinear analysis on seismic behavior of RC columns considering buckling and fatigue damage of reinforcing steel bar

杨红,张洛,张和平

DOI: https://doi.org/10.14006/j.jzjgxb.2013.11.018

2013-01-01

Abstract:Flexibility method based fiber model could calculate strong material nonlinear hysteresis responses of reinforced concrete columns more efficiently, but the accuracy of numerical simulation for the capacity of column at later soften phase after peak will be obviously decreased if buckling and fatigue damage of longitudinal reinforcing bar were not considered in the constitutive model. Based on the seismic behavior experimental results of eight reinforced concrete columns, the hysteresis nonlinear responses of the columns were simulated by adopting constitutive model including buckling and fatigue damage of bar and flexibility method based fiber model within the OpenSees platform. The results show that, with respect to the column of small axial force ratio, namely the ratio of axial force to column sectional area and compressive strength of concrete, the influence of bar buckling on the strength degradation after peak capacity of the high axial force ratio column is obviously greater. For the column with slenderness ratio of longitudinal bar less than 3.0, the influence of bar buckling on the nonlinear analysis results can be basically ignored. In the case of the column with slenderness ratio being 5.00 to 8.75 and axial force ratio being small, buckling have certain effect on the analysis result, but better analysis results of strength degradation characteristics of column at softening phase can be obtained if fatigue damage is considered. For the column with axial force ratio being high and slenderness ratio being 6.25 to 7.00, both of buckling and fatigue damages will evidently decrease the analysis error of strength degradation. Considering buckling and fatigue damages simultaneously is found to be beneficial to obtain better simulation results of strength degradation characteristics of column.