Improvement of flanging accuracy with small springback and service performance of AA7075 using high-speed forming
Hanpeng Wang,Ziqin Yan,Ang Xiao,Zhuoxin Yu,Xuan Chen,Xiaohui Cui
DOI: https://doi.org/10.1016/j.jmapro.2024.03.107
IF: 5.684
2024-04-12
Journal of Manufacturing Processes
Abstract:AA7075 is widely used in aerospace manufacturing panel parts but can rupture easily and experience high springback under conventional forming processes. This study analyzed the combination of various heat treatment conditions with stamping or high-speed forming (HSF) for the AA7075. The effect of the combined strategy on the flanging height, forming accuracy, and corrosion properties is studied using numerical simulations and experiments. The minimum aperture of the AA7075-T6 under HSF and stamping was 64 mm and 68 mm, respectively, whereas, for the AA7075-WQ, it was 54 mm and 64 mm, respectively. Compared with stamping, considerable vibration was produced during the HSF of the AA7075 sheet. Because of elastic strain energy of approximately zero in HSF processed parts, the clearance of AA7075-T6 and AA7075-WQ parts was 0.3 mm and 0.1 mm, respectively. The HSF helped suppress the material necking and improved the forming height. Compared with stamping, the material demonstrated a smaller second phase under HSF after solution aging than stamping, showing a more dispersed dislocation with better peak hardness and corrosion performance. The HSF demonstrated highly precise flanging of the AA7075 by effectively improving the material's plastic deformation.
engineering, manufacturing