Abstract:Hydraulic actuated quadruped robot similar to BigDog has two primary performance requirements, load capacity and walking speed, so that it is necessary to balance joint torque and joint velocity when designing the dimension of single leg and controlling its motion. On the one hand, because there are three joints per leg on sagittal plane, it is necessary to firstly optimize the distribution of torque and angular velocity of every joint on the basis of their different requirements. On the other hand, because the performance of hydraulic actuator is limited, it is significant to keep the joint torque and angular velocity in actuator physical limitations. Therefore, it is essential to balance the joint torque and angular velocity which have negative correlation under the condition of constant power of the hydraulic actuator. The main purpose of this article is to optimize the distribution of joint torques and velocity of a redundant single leg with joint physical limitations. Firstly, a modified optimization criterion combining joint torques with angular velocity that takes both support phase and flight phase into account is proposed, and then the modified optimization criterion is converted into a normal quadratic programming problem. A kind of recurrent neural network is used to solve the quadratic program problem. This method avoids tremendous matrix inversion and fits for time-varying system. The achieved optimized distribution of joint torques and velocity is useful for aiding mechanical design and the following motion control. Simulation results presented in this article confirm the efficiency of this optimization algorithm.

Take-Off Motion Planning Of Legged Hopping Robot With Redundancy Characteristic

Sprinting Motion Planning for Planar Bipedal Robots Based on Driving Coordination between the Knee and Ankle Joints

Coordinated Motion Control Between the Knee and Ankle Joints for One-legged Robot Based on Particle Swarm Optimization Algorithm

Visualized Trajectory Planning of Flexible Redundant Robotic Arm Using A Novel Hybrid Algorithm

Optimal Motion Planning of a One-Legged Hopping Robot

Motion Planning for a Legged Robot with Dynamic Characteristics

Run-and-jump Planning and Control of a Compact Two-wheeled Legged Robot

Motion Analysis and Control of a Single Leg of Hydraulically Actuated Quadruped Robots During Vertical Hopping

Joint Torque And Velocity Optimization For A Redundant Leg Of Quadruped Robot

Intermittent Gait Planning Method of Quadruped Robot Based on Velocity Vector

Kinematics Analysis and Numerical Simulation of the Hopping Process of Legged Hopping Robots

A Unified Trajectory Optimization Approach for Long-Term and Reactive Motion Planning of Legged Locomotion

An Alternating Optimization Approach Integrating Linkage Design with Motion Planning for Jumping Robot

Global Motion Planning and Redundancy Resolution for Large Objects Manipulation by Dual Redundant Robots with Closed Kinematics

Varying velocity hopping gait planning of a one-legged robot

A Real-Time Planning and Control Framework for Robust and Dynamic Quadrupedal Locomotion

Self-Motion Planning of Functionally Redundant Puma560 Manipulator Via Quadratic-Program Formulation and Solution

Self-Motion Planning Of Redundant Robot Manipulators Based On Quadratic Program And Shown Via Pa10 Example

Modelling and Trajectory Planning for a Four Legged Walking Robot with High Payload.

Kinematic Analysis and Motion Planning of A Quadruped Robot with Partially Faulty Actuators

Optimization-based dynamic motion planning and control for quadruped robots