Abstract:Compliant leg function found during bouncy gaits in humans and animals can be considered a role model for designing and controlling bioinspired robots and assistive devices. The human musculoskeletal design and control differ from distal to proximal joints in the leg. The specific mechanical properties of different leg parts could simplify motor control, e.g., by taking advantage of passive body dynamics. This control embodiment is complemented by neural reflex circuitries shaping human motor control. This study investigates the contribution of specific passive and active properties at different leg joint levels in human hopping at different hopping frequencies. We analyze the kinematics and kinetics of human leg joints to design and control a bioinspired hopping robot. In addition, this robot is used as a test rig to validate the identified concepts from human hopping. We found that the more distal the joint, the higher the possibility of benefit from passive compliant leg structures. A passive elastic element nicely describes the ankle joint function. In contrast, a more significant contribution to energy management using an active element (e.g., by feedback control) is predicted for the knee and hip joints. The ankle and knee joints are the key contributors to adjusting hopping frequency. Humans can speed up hopping by increasing ankle stiffness and tuning corresponding knee control parameters. We found that the force-modulated compliance (FMC) as an abstract reflex-based control beside a fixed spring can predict human knee torque-angle patterns at different frequencies. These developed bioinspired models for ankle and knee joints were applied to design and control the EPA-hopper-II robot. The experimental results support our biomechanical findings while indicating potential robot improvements. Based on the proposed model and the robot's experimental results, passive compliant elements (e.g. tendons) have a larger capacity to contribute to the distal joint function compared to proximal joints. With the use of more compliant elements in the distal joint, a larger contribution to managing energy changes is observed in the upper joints.

Coordinated Motion Control Between the Knee and Ankle Joints for One-legged Robot Based on Particle Swarm Optimization Algorithm

Sprinting Motion Planning for Planar Bipedal Robots Based on Driving Coordination between the Knee and Ankle Joints

Driving Coordination Between the Knee and Ankle Joints During Tiptoe Support Phase for Bipedal Robots Sprinting

Implementation of Stable and Efficient Hopping with Serial Elastic Actuators

Design and control of stiffness coordination between knee and ankle joints for a hopping legged robot

Dynamic Walking Gait Designing for Biped Robot Based on Particle Swarm Optimization

Stable and Fast Planar Jumping Control Design for a Compliant One-Legged Robot

A Joint Physical Constraints Avoidance Method for Inverse Kinematics Problem of Redundant Humanoid Manipulator

Visualized Trajectory Planning of Flexible Redundant Robotic Arm Using A Novel Hybrid Algorithm

Optimal Motion Planning of a One-Legged Hopping Robot

Dynamic Hopping Height Control of Single-Legged Hopping Robot

Vertical hopping control of hydraulically actuated single-legged robot based on SLIP

Joint Torque and Ground Reaction Force Estimation for a One-Legged Hopping Robot.

Cooperative Control Strategy of Pump-controlled Exoskeleton Robot Walking

Control of One-Legged Robot Hopping in Place

Hopping Motion on Heavy-Legged Bipedal Robot Based on SLIP Model and Whole Body Control

An Alternating Optimization Approach Integrating Linkage Design with Motion Planning for Jumping Robot

Role of compliant mechanics and motor control in hopping - from human to robot

Dynamics synthesis and control for a hopping robot with articulated leg

Control Algorithm Based on Time Event for a Pneumatic Single-legged Hopping Robot

Trajectory Planning and Control for Hopping Robot at the Stance Phase