Abstract:The accumulation of soda residue (SR) and calcium carbide slag (CCS) wastes causes serious environmental pollution, which mitigation requires to expand their resource utilization channels. Based on our developed SR-CCS co-activated binder system (SCB), this study intended to prepare SCB-based concrete (SCBC) with compressive strength of 20–40 MPa. Through uniaxial and triaxial compressive stress-strain experiments, the development law of mechanical properties and deformation of SCBC was revealed, and the uniaxial and triaxial stress-strain relations were established. The results showed that the compressive strength of SCBC increased gradually with confining pressure, but the increment was less than that of ordinary cement concrete (OCC) of the same grade. Under various confining pressures, the stress-strain curve of SCBC had a shorter elastic rising stage, a longer plastic rising stage, and a smaller elastic modulus than OCC. Thus, it had a stronger plastic deformation ability. However, the falling stage was steeper, indicating its poor ductility. The quantitative relationships between compressive strength, peak strain, ultimate strain, elastic modulus, and confining pressure were established, which were in good agreement with the experiment values. The equations of the compression meridian failure criterion in parabolic and power function forms were established for SCBC. Based on the classical stress-strain model, the uniaxial and triaxial stress-strain relationships were established using statistical regression method. The results provided a theoretical basis for promoting the engineering application of SCBC and furnished solutions for reducing environmental pollution by SR and CCS.

Early-age strain–stress relationship and cracking behavior of slag cement mixtures subject to constant uniaxial restraint

Cracking potential of alkali-activated slag and fly ash concrete subjected to restrained autogenous shrinkage

Crack Initiation in Asphalt Mixtures under External Compressive Loads

Tensile Creep Behavior of Concrete Subject to Constant Restraint at Very Early Ages

Thermal deformation and stress of alkali-activated slag concrete under semi-adiabatic condition: Experiments and simulations

Thermal-Related Stress–Strain Behavior of Alkali Activated Slag Concretes under Compression

Experimental Research on Static and Dynamic Characteristics of Cement Soil under Strain Control

Mechanical Properties and Stress–Strain Constitutive Relations of Coal-Fired Slag Concrete

Stress Prediction in Very Early-Age Concrete Subject to Restraint under Varying Temperature Histories

Early Age Properties and Cracking Control of Concrete

Cracking Behaviour of Cast in Situ Reinforced Concrete Slabs with Control Joints

Insight into Thermal Stress Distribution and Required Reinforcement Reducing Early-Age Cracking in Mass Foundation Slabs

Analytical Prediction and Experimental Research on Shrinkage Cracking of Restrained Early-Age Concrete

Stress-Strain Behavior and Strength Development of High-Amount Phosphogypsum-Based Sustainable Cementitious Materials

Effect of Reinforcement on Early-Age Concrete Temperature Stress: Preliminary Experimental Investigation and Analytical Simulation

Restrained Cracking Failure Behavior of Concrete Due to Temperature and Shrinkage

Stress-strain behavior of low-carbon concrete activated by soda residue-calcium carbide slag under uniaxial and triaxial compression

Study on stress–strain relationship and constitutive model of recycled aggregate concrete under axial cyclic compression

Optimizing the Utilization of Steel Slag in Cement-Stabilized Base Layers: Insights from Freeze–Thaw and Fatigue Testing

Autogenous shrinkage of alkali-activated slag: A critical review

A Study on the Cracking Resistance Theory at Early Ages of High Performance Concrete added with Lithium Slag and Fly Ash