Abstract:An accurate yet simple model is the key to the design and control of intricate electro-catalytic oxidation of pharmaceutical contaminated wastewater. For both batch and unsteady-state continuous flow stirred tank reactors (CSTR), batch reactor models have been used earlier. Further, these models do not correlate rate to the operating conditions, and consider pseudo-first/second-order kinetics. Here, first-principles models are proposed by formulating unsteady-state mass balances, modifying them to attain realistic final conditions, and incorporating fractional variable-order kinetics. Following integral analysis, analytical solutions are obtained. These are independently applicable to design, unlike a numerical solution. Nonlinear regression is performed to estimate the model parameters from the transient experimental data. The simulations yield markedly accurate model parameters together with a better fit to the experimental data of Ti/RuO 2 -mediated amoxicillin-trihydrate electro-oxidation, for CSTR and batch reactors. For the batch reactor, the operating conditions are varied one at a time. Their effects on the model parameters are elucidated based on the oxidant and transformation species formed. The computed optimum model parameters are: rate constant 3.318 × 10 −3 mg −0.092 m 1.276 min −1 , order 1.092, initial rate 4.032 × 10 2 mg m −2 min −1 , and final conversion 90.6% in 180 min. The corresponding operating conditions are: pH 2.0, feed 50 mg L −1 , electrolyte 2 g L −1 , and current 1 A. A simple generalized power-law correlation, associating rate to the operating conditions, is then estimated. Statistical analysis of these models using central composite design delivers R 2 0.99, predicted R 2 0.96, and optimum set close to the above. The corresponding sensitivity analysis and generalized correlation, both show applied current to be the most significant operating condition. The dynamic modeling approaches proposed here can be extended to model, control, and scale-up complex reaction systems.

Mathematical Model for the Factors Affecting Catalase Activity in Activated Sludge

Modeling and Simulation of Commercial Catalytic Reformers

THE MATHEMATICAL SIMULATION OF AN ETHOXYLATION TUBULAR REACTOR

A First-Order Kinetic Model for Simulating the Aerobic Degradation of Municipal Solid Waste.

Mathematical Modeling of High-Rate Anammox Uasb Reactor Based on Granular Packing Patterns

Combined Effects of Temperature and Ph on Biohydrogen Production by Anaerobic Digested Sludge

Orthogonal Test Design Based Analysis of Factors Controlling Simultaneous Anaerobic Sulfide and Nitrate Removal Process

Ensemble Engineering and Statistical Modeling for Parameter Calibration Towards Optimal Design of Microbial Fuel Cells

A kinetic model for the prediction of sludge formation in a membrane bioreactor

Environmental Biological Model Based on Optimization of Activated Sludge Process

Substrate consumption and excess sludge reduction of activated sludge in the presence of uncouplers: a modeling approach

Mathematical modeling of methane production and sulfate reduction in upflow anaerobic sludge blanket reactors: Calibration, validation and prediction of reciprocal effects

Chemical-equilibrium-based model for describing the strength of sludge: taking hydrogen-producing sludge as an example.

Modelling the combined effect of temperature and pH on the rate coefficient for bacterial growth

STUDY ON DESULFURIZATION CHARACTERISTIC IN CaO ACTIVATION REACTOR OF LIMESTONE INJECTION FGD SYSTEM Ⅰ--MATHEMATICS MODEL

Mathematical modeling and kinetics of batch and continuous electro-catalytic oxidation of pharmaceutical-contaminated wastewater

The combined effects of biomass and temperature on maximum specific ammonia oxidation rate in domestic wastewater treatment

Hydrodynamics and mass transfer coefficient in activated sludge aerated stirred column reactor: experimental analysis and modeling

Modelling of high-rate activated sludge process: Assessment of model parameters by sensitivity and uncertainty analyses

A Model-Based Approach to Study the Effect of Temperature in Plant-Wide Biological Wastewater Treatment Plants

Mathematical Model of Anaerobic Propionate Degradation by Incorporating the R/k Selection Theory