Effects of starch–citric acid cross-linking on the fibrous composites using waste paper pulp material for eco-friendly packaging
Pontree Itkor,Ajit Kumar Singh,Myungho Lee,Athip Boonsiriwit,Youn Suk Lee
DOI: https://doi.org/10.1007/s13399-022-03564-0
IF: 4.05
2022-11-19
Biomass Conversion and Biorefinery
Abstract:Waste paper pulp (WP) is considered an eco-friendly alternative to petrochemical plastic. However, certain properties of WP limit its application in packaging. Starch–acid cross-linking reportedly improves the physical and barrier properties of cellulose-based materials. Therefore, this study aims to investigate the effect of starch–citric acid (CA) cross-linking on the physical and barrier properties of WP. Herein, WP/starch–CA-cross-linked composite sheets (WPSAs) were fabricated, and their physical, barrier, and thermal properties and morphology were investigated. The results indicated that introducing CA into WP/starch (WPS) reduced water absorption up to 39.5% compared to that of the control. Additionally, the surface and cross-section morphology, tensile strength, contact angle, and thermal properties improved as the concentration of CA increased. The highest tensile strength was obtained for WPSA with 5% of CA, providing 1445% and 26% values higher than that of the control and WPS, respectively. Moreover, the contact angle of this WPSA was superior at 116.83°. The thermal stability was also improved by increasing the glass transition temperature and decreasing the weight loss and decomposition rate. Furthermore, the addition of CA into WPS increased the system R-values up to 38% compared to that of the control, indicating improvement in the thermal-insulation property. However, introducing more than 5% of CA negatively affected the morphology, tensile strength, and contact angle. Thus, adding 5% of CA improves the physical and barrier properties of WPSA, which can be utilised for biodegradable packaging.Graphical abstract
energy & fuels,engineering, chemical