Abstract:Ethylene/ethane separation by cryogenic distillation is one of the most energy intensive separation processes due to the close boiling points of the components. But a hybrid membrane-distillation process is a possibility for energy reduction because gas separation membrane technology has a series of advantages, such as high efficiency, low energy consumption, easy operation and so on. In order to ensure the product quality and system stability by using the new hybrid membranedistillation process on ethylene/ethane, process characteristics need to be investigated further to develop applicable control schemes combining actual conditions. This paper presents three control scheme of hybrid membrane-distillation process on ethylene/ethane,including temperature control scheme, pressure and temperature control scheme and ratio control scheme, based on distillation-vapor permeation membrane hybrid process on ethylene-ethane system. The efficiency of the three control strategies is examined on the basis of the responses to step changes of the flow rate ±5%, temperature +2°C and -0.032°C( the heat value equals the value when the temperature rises to 2°C). Distillate flow rate, bottom flow rate, ethylene concentration in distillate, ethane concentration in bottom, top stage pressure, top stage temperature, reflux ration and boilup ratio eight parameters are compared to conform the optimal control strategy. The result shows that the stability of ratio control scheme is the best, but the temperature control scheme is frequently-used in the field of industrial applications for its simpler configuration.

Dynamic Simulation of Petlyuk Column for Separation of Ternary Mixtures

Dynamic Simulation and Control schemes of hybrid membrane-distillation process on ethylene- ethane system

A Study on Increasing Separation Efficiency of an Industrial, Compound Distillation Column

Nonequilibrium model and parameter estimation on three-phase distillation in a packed column

Dynamic optimization of operation of heat-integrated distillation column systems

Design and control of an ideal heat-integrated distillation column (ideal HIDiC) system separating a close-boiling ternary mixture

Influence of Operating Conditions on the Hybrid Separation Process Used for C4 Etherified Products

A Separation Column for Liquid Mixture Based on Phase Transform: Experiment and Simulation

Large-scale Equation Oriented Dynamic Simulation of Ethylene Separation Columns

Simulation and Analysis of Distillation Column in PET Plant

Research on Rigorous Mechanism Modeling for Distillation Column Series under Wide Variation of Feed Condition

Dynamic control of an energy-saving process with two extractive dividing-wall columns for separation of acetone/methanol/butanone/ tert-butyl alcohol mixtures

DESIGN OF INTEGRATED PROCESS OF DISTLLIATION AND PERVAPORATION FOR THE SEPARATION OF MTBE-C4-METHANOL MIXTURE

Thermodynamic analysis and azeotropic distillation simulation for acetic acid-water-butyl acetate system

Control of extractive distillation process for separating heterogenerous ternary azeotropic mixture via adjusting the solvent content

Dynamic Control Strategy of the Ternary Azeotrope Separation Process Assisted by Reactive-extractive Distillation for Ethyl acetate/Isopropanol/Water

Design and Control of Extractive Dividing Wall Column for Separating Dipropyl Ether/1-Propyl Alcohol Mixture

Design, optimization, and control of reactive distillation column for the synthesis of tert-amyl ethyl ether

Simulation of Triethylenedialine Separation Process

Dynamic Simulation of Primary Esterification Section of Poly(ethylene-Terephthalate)

Intensified hybrid reactive-extractive distillation process for the separation of water-containing ternary mixtures