Abstract:With the universal utilization of the common-rail injection system in automotive diesel engines, the multistage injection strategies have become typical approaches to satisfy the increasingly stringent emission regulations, and especially the post injection has received considerable attention as an effective way for reducing the smoke emissions. Normally the post injection is applied in combination with the pilot injection to restrain the NOx emissions, smoke emissions, and combustion noise simultaneously, and the pilot injection condition affects the combustion process of the main injection and might affect the smoke reduction effect of the post injection. Thus this study aims at obtaining the post injection strategy to reduce smoke emissions in a diesel engine, where post injection is employed in combination with pilot injection. The experiments were performed using a single-cylinder diesel engine under various conditions of pilot and post injection with a constant load at an IMEP of 1.01 MPa, fixed speed of 1500 rpm, and NOx emissions concentration of 150 ± 5 ppm that was maintained by adjusting the EGR ratio. The injection pressure was set at 90 MPa at first, and then it was varied to 125 MPa to evaluate the effects of post injection on the smoke reduction in the case of higher injection pressure. The experimental results show that small post injection quantity with a short interval from the end of main injection causes less smoke emissions. And larger pilot injection quantity and later pilot injection timing lead to higher smoke emissions. And then, to explore and interpret the smoke emissions tendencies with varying pilot and post injection conditions, the experimental results of three-stage injection conditions were compared to those of two reference cases, which only included the pilot and main injection, and the interaction between main spray flames and post sprays was applied for analysis. Based on the comparative analysis, the larger smoke reduction effect of post injection was observed with the larger pilot injection quantity, while it is not greatly influenced by pilot injection timing. In addition, the smoke emissions can be reduced considerably by increasing the injection pressure, however the smoke reduction effect of post injection was attenuated. And all of these tendencies were able to be interpreted by considering the intensity variation of the interaction between main spray flames and post sprays.

Study on the mechanism of soot reduction by multi-injection coupled with EGR

Experimental Study of the Influence of Multi-Injection Coupled with EGR on Diesel Performance and Emissions

Experimental study of multiple injections and coupling effects of multi-injection and EGR in a HD diesel engine

Mechanism of Soot and NOx Emission Reduction Using Multiple-Injection in a Diesel Engine

Effects of multiple injections on combustion and emissions in a heavy-duty diesel engine at high load and low speed

Effect of Multiple-Injection Strategies on Diesel Engine Exhaust Particle Size and Nanostructure

Numerical Study on the Effects of Multiple-Injection Coupled with EGR on Combustion and NOx Emissions in a Marine Diesel Engine

Experimental study of multiple injections on a HD diesel engine

An Experimental Study on Smoke Reduction Effect of Post Injection in Combination with Pilot Injection for A Diesel Engine

Investigations of split injection strategies for the improvement of combustion and soot emissions characteristics based on the two-color method in a heavy-duty diesel engine

Study of the control strategies on soot reduction under early-injection conditions on a diesel engine

Comparative Study of Effects of Pilot Injection and Fuel Properties on Low Temperature Combustion in Diesel Engine under a Medium EGR Rate

Study of Pilot Injection for the Improvement of Combustion and Emissions Characteristics in A Heavy-Duty Diesel Engine

Numeric investigation of EGR and post-injection diesel emissions

Numerical Simulation on Soot Reduction Mechanism by Post-Injection in Diesel Engine

Influence of Multi-Injection on Combustion and Emission of Diesel Engine

Effects of the Injection Parameters on the Premixed Charge Compression Ignition Combustion and the Emissions in A Heavy-Duty Diesel Engine

Effects of exhaust gas recirculation and load on soot in a heavy-duty optical diesel engine with close-coupled post injections for high-efficiency combustion phasing

Study on the combustion and emission characteristics of a diesel engine with multi-injection modes based on experimental investigation and computational fluid dynamics modelling

Effect of Two-Stage Injection on Combustion and Emissions under High Egr Rate on A Diesel Engine by Fueling Blends of Diesel/Gasoline, Diesel/N-Butanol, Diesel/Gasoline/N-Butanol and Pure Diesel

Impact of multi-injection strategies on morphology, nanostructure and oxidation reactivity of diesel soot particles