Abstract:The three-phase three-wire neutral-point-clamped shunt active power filter (NPC-SAPF), which most adopts classical closed-loop feedback control methods such as proportional-integral (PI), proportional-resonant (PR) and repetitive control, can only output 1st–25th harmonic currents with 10–20 kHz switching frequency. The reason for this is that the controller design must make a compromise between system stability and harmonic current compensation ability under the condition of less than 20 kHz switching frequency. To broaden the bandwidth of the compensation current, a Lyapunov stability theory-based control strategy is presented in this paper for NPC-SAPF. The proposed control law is obtained by constructing the switching function on the basis of the mathematical model and the Lyapunov candidate function, which can avoid introducing closed-loop feedback control and keep the system globally asymptotically stable. By means of the proposed method, the NPC-SAPF has compensation ability for the 1st–50th harmonic currents, the total harmonic distortion (THD) and each harmonic content of grid currents satisfy the requirements of IEEE Standard 519-2014. In order to verify the superiority of the proposed control strategy, stability conditions of the proposed strategy and the representative PR controllers are compared. The simulation results in MATLAB/Simulink (MathWorks, Natick, MA, USA) and the experimental results obtained on a 6.6 kVA NPC-SAPF laboratory prototype validate the proposed control strategy.

A Lyapunov-Based Control for a Single-Phase Shunt Hybrid Active Filter

Research on PI and Repetitive Control Strategy for Shunt Active Power Filter with LCL-filter

High-Performance Resonant Controller For Active Power Filter With Selective Harmonic Compensation

Analysis of a Novel Hybrid Series Active Power Filter Topology

Sliding Mode Control of a Shunt Hybrid Active Power Filter Based on the Inverse System Method

A Novel Control Approach for LCL-based Shunt Active Power Filter with High Dynamic and Steady-State Performance

Active Power Filter for Harmonie Compensation Using a Digital Dual-Mode-structure Repetitive Control Approach

Design and implementation of compound current control strategy for improved LCL-based Shunt Active Power Filter

Decoupling Control and Zero Dynamics Stabilization for Shunt Hybrid Active Power Filter

A waveform control technique for high power Shunt Active Power Filter based on repetitive control algorithm

A Lyapunov Stability Theory-Based Control Strategy for Three-Level Shunt Active Power Filter

High precision compensation for high power Hybrid Active Power Filter based on repetitive control algorithm

Dual-repetitive Control Algorithm for Three-Phase Shunt Active Power Filters

Hamiltonian modeling and passivity-based control of shunt hybrid active power filter

Passivity-based control of a three-phase shunt hybrid active power filter

Shunt APF Control Strategy Based on Multiple Synchronous Rotating Transform

Current Loop Control Approach for LCL-based Shunt Active Power Filter

A Double-Loop Current Control Strategy for Shunt Active Power Filter with Lcl Filter

Fast-Transient Repetitive Control Strategy for A Three-Phase Lcl Filter-Based Shunt Active Power Filter

Control Strategy for Shunt Active Power Filters with High Compensation Precision

Modeling and Control of Single Phase Active Power Filter Based on Switched Linear System