Abstract:Thanks to the actuation flexibility of their systems, electric vehicles with individual powertrains, including in-wheel and on-board motors, are a very popular research topic amongst various types of electrified powertrain architectures. The introduction of the individual electric powertrain provides great capacity for improvement of the vehicle's energy efficiency and control performance. However, it also poses tremendous challenges concerning vehicle safety, due to the complex system dynamics and cooperation mechanisms between multiactuators.For an electric vehicle with independently controlled motors, because of design and manufacturing factors, the steady-state error of each motor output torque, and the flexibilities and nonlinear backlash of left and right drivetrains, can be different. This results in asymmetrical output characteristics of electric powertrain systems on the same axle. Therefore, during a normal straight-line deceleration, an unexpected yaw moment would be generated, affecting vehicle's directional stability.In this study, a novel method of directional stability enhancement through robust control of blended braking of an electric vehicle equipped with four individual on-board motors during normal straight-line deceleration are studied. System models, including the vehicle dynamics, tire, electric powertrain, and hydraulic brake models, are developed. Mechanisms of directional instability of the electric vehicle during straight-line braking are analyzed. To further improve the electric vehicle's safety and performance, robust control algorithm of blended braking is developed using nonlinear sliding mode approach. Simulations of the proposed control strategy is carried out under straight-line braking. The results demonstrate that the developed approach is advantageous over the baseline, with respect to both the directional stability and regeneration efficiency, thus validating the feasibility and effectiveness of the controller synthesis.

Hyperbolic Distribution of All-wheel Independent Braking Force for Cornering Vehicle

Research on Modeling and Load Simulation Algorithm of Tracked Vehicle Braking System on Mu-Split Road Surfaces

All-Wheel Braking Force Allocation During a Braking-in-Turn Maneuver for Vehicles with the Brake-by-Wire System Considering Braking Efficiency and Stability.

Finding Optimum Ackermann Geometry for a Car Undergoing Steady State Cornering Using Tire Data

Optimal allocation of tire force based on vehicle stability

Study on the Match of Front Wheel Caster Angle and Stability of High-speed Cornering

Control algorithm of electronic braking force distribution based on deceleration parameters

Comprehensive Chassis Control Strategy Based on Coordination of Traction/Braking Distribution and Active Roll Control

Model-Based Vehicle Stability Control with Tyre Force and Instantaneous Cornering Stiffness Estimation

A new formulation of the understeer gradient and stability margin to analyse vehicle steady-state cornering behaviour

Robust Control of Regenerative and Hydraulic Brakes for Enhancing Directional Stability of an Electric Vehicle During Straight-Line Braking

Integrated control of braking-yaw-roll stability under steering-braking conditions

Control strategy on regenerative braking force of four-wheel-drive electric vehicle

Regenerative braking fault compensation control of distributed electric vehicle considering random wheel fault degree

Optimum Tyre Force Distribution for Four-Wheel-independent Drive Electric Vehicle with Active Front Steering

Research on intelligent optimal allocation control strategy for stability and braking of heavy tyre blowout vehicle

Evaluation of Vehicle Braking Performance on Wet Pavement Surface using an Integrated Tire-Vehicle Modeling Approach

4WD Vehicle DYC Based on Tire Longitudinal Forces Optimization Distribution

Two-level optimal torque distribution for handling stability control of a four hub-motor independent-drive electric vehicle under various adhesion conditions

Design and application of a tire slip energy control scheme based on optimal guaranteed cost theory for four‐in‐wheel drive electric vehicles

Robust control with decoupling performance for steering and traction of 4WS vehicles under velocity-varying motion