Abstract:Ruled surfaces found in engineering parts are often blended with a constraint surface, like the blade surface and hub surface of a centrifugal impeller. It is significant to accurately machine these ruled surfaces in flank milling with interference-free and fairing tool path, while cur-rent models in fulfilling these goals are complex and rare. In this paper, a tool path planning method with optimal cutter locations (CLs) is proposed for 5-axis flank milling of ruled surfaces under mul-tiple geometric constraints. To be specific, a concise three-point contact tool positioning model is firstly developed for a cylindrical cutter. Different tool orientations arise when varying the three contact positions and a tool orientation pool with acceptable cutter-surface deviation is constructed using a meta-heuristic algorithm. Fairing angular curves are derived from candidates in this pool, and then curve registration for cutter tip point on each determined tool axis is performed in respect of interference avoidance and geometric smoothness. On this basis, an adaptive interval determina-tion model is developed for deviation control of interpolated cutter locations. This model is designed to be independent of the CL optimization process so that multiple CLs can be planned simultaneously with parallel computing technique. Finally, tests are performed on representative surfaces and the results show the method has advantages over previous meta-heuristic tool path planning approaches in both machining accuracy and computation time, and receives the best com-prehensive performance compared to other multi-constrained methods when machining an impel-ler. (c) 2023 Production and hosting by Elsevier Ltd. on behalf of Chinese Society of Aeronautics and Astronautics. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/ licenses/by-nc-nd/4.0/).

Constrained Ruled Surface Reconstruction for 5-Axis NC Machining of Aero-Structure

Research On Feedrate Control Strategy For Sculptured Surfaces Machining With Five-Axis Cnc

Partition Five-Axis Surface Machining of CFRP Laminate Structures Considering Fiber Orientation

A Novel 3D Surface Topography Prediction Algorithm for Complex Ruled Surface Milling and Partition Process Optimization

Tool Positioning Algorithm Based on Smooth Tool Paths for 5-Axis Machining of Sculptured Surfaces

A Novel Minimum-Time Feedrate Schedule Method for Five-Axis Sculpture Surface Machining with Kinematic and Geometric Constraints

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Tool path generation for 5-axis flank milling of ruled surfaces with optimal cutter locations considering multiple geometric constraints

An accurate surface error optimization for five-axis machining of freeform surfaces

Five-axis Tool Path Generation in CNC Machining of T-spline Surfaces

A Global Tool Orientation Optimization Method for Five-axis CNC Machining of Sculptured Surfaces

Using Rotary Contact Method for 5-Axis Convex Sculptured Surfaces Machining

Five-axis STEP-NC Controller for Machining of Surfaces

Positioning Algorithm for 5-Axis Machining of Ruled Surfaces Based on Radius and Angle Offset

Combined Reparameterization-Based Spiral Toolpath Generation for Five-Axis Sculptured Surface Machining

Axis path planning of five-axis surface machining by optimizing differential vector of the axis movement considering tool posture limits

Optimized Tool Path Planning for Five-Axis Flank Milling of Ruled Surfaces Using Geometric Decomposition Strategy and Multi-Population Harmony Search Algorithm

Tool Path Planning Algorithm for Five-Axis NC Machining of Sculptured Surfaces

Tool Orientation Optimization Considering Cutter Deflection Error Caused by Cutting Force for Multi-Axis Sculptured Surface Milling

Research on Surface Morphology of the Ruled Surface in Five-Axis Flank Milling

Method Study on Optimization of Tool Axis Vector for Complex Surface of 5-Axis CNC