Abstract:There are large numbers of welds on cranes' lattice booms. Due to notably complicated force conditions, the fatigue life analysis of the lattice boom is difficult when designing the limit life. The fatigue cycle of the utilization level of a lattice boom crane is in the overlap zone of low-cycle fatigue and high-cycle fatigue. The poor accuracy of measurement of the fatigue life of lattice booms indicates that the calculation dispersion of the linear Palmgren-Miner (PM) rule was high. To obtain real crane stress spectra inexpensively and conveniently, a new stress spectra acquisition method based on the 'measured & simulated & compared & statistics' integrated strategy of crane K-type welded joints is proposed. The errors of the maximum stress amplitudes between the measured stress spectra and the simulated stress spectra were less than 10%. The fatigue test results also indicated that errors of the test fatigue life were less than 10% under both the simulated and the measured stress spectra. A new, simplified Huffman non-linear cumulative damage theory is proposed to calculate the fatigue life of crane K-type welded joints based on the notch stress and strain approaches. The calculation results indicated that the accuracy of the non-linear damage accumulation was higher than that of the PM rule, although the calculation result based on the non-linear damage accumulation method was slightly un-conservative when the initial damage was not considered in the calculation. By setting different initial damage conditions, various results were analysed, which revealed that the calculation errors of fatigue life based on the non-linear theory were less than 10% when the initial damage levels were set from 0.02 to 0.04. Such results are appropriate for engineering applications. When the fatigue life calculation needs to be more conservative, the initial damage levels may be set from 0.04 to 0.07; the resulting calculation errors could be less than 25%. As the Huffman non-linear cumulative damage theory requires data from only a few material properties, such as the cyclic stress-strain curve and the constant amplitude strain-life curve, it could therefore be more suitable for engineering applications with higher calculation accuracy and fewer costs.

Research on Residual Fatigue Life Model for Lattice Boom of the Crane In-Service

Dynamic Reliability of the Weight Index Model Research of Residual Fatigue Life of the Crane Boom

A New Fatigue Life Calculation Method Based on Non-Linear Cumulative Damage Theory

Fatigue Life Analysis of Crane K-Type Welded Joints Based on Non-Linear Cumulative Damage Theory

Analysis of the Fatigue Life for K-nodes of Crane Based on the Non-linear Cumulative Damage Theory

Component Structural Equivalent Research Based on Different Failure Strength Criterions and the Theory of Critical Distance

Prediction of Remaining Fatigue Life of In-Service Bridge Cranes

Research and application of crane fatigue life prediction method based on sequential method

A New Empirical Life Prediction Model For 9-12%Cr Steels Under Low Cycle Fatigue And Creep Fatigue Interaction Loadings

Fatigue failure analysis and life prediction of wheel load local area of ladle crane

METHODOLOGY FOR RESIDUAL STRENGTH EVALUATION OF CRACKED STRUCTURES

Fatigue Damage Accumulation Modelling of Critical Components Subjected to Moving Crane Loads in Reinforced-Concrete Industrial Buildings

Fatigue Life Prediction for Boom Structure of Concrete Pump Truck

Fatigue failure analysis of steel crane beams with variable-section supports

Prediction of fatigue crack extension life and assessment of load reduction

Multi-layer Statistical Analysis and Surrogate Model Based Fatigue Crack Growth Reliability Assessment of Lifting Lug Structure under Random Load History

Fatigue Research on Welding Joint of the Main Girder in Bridge Crane

A Model Assessment Method for Predicting Structural Fatigue Life Using Lamb Waves

Research on Dynamic Properties of Crane Boom under the Condition of Accidental Unloading

Research on Monitoring and Forecasting Method of Fatigue Damage in the Hot Spots of the Metallurgy Crane

A Fuzzy Residual Strength Based Fatigue Life Prediction Method