Abstract:Air-cooled condenser used for refrigeration and heat pump applications generally consists of plate-fin-tubes. A universal simulation model has been developed for simulation of plate-fin-tube condenser with distributed-parameter method. The model discretizes coil into circuit to circuit, tube to tube and then node to node along the refrigerant path and carries out repetitive marches from the refrigerant inlet to its outlet while simultaneously updating the values of the air stream properties for obtaining quick convergence. Unlike previous models, this model is capable of analyzing complicated circuiting arrangements and can take into count the variation in heat transfer coefficient and pressure drop coefficient along the tube. Especially, the coefficient of heat transfer and pressure drop of two-phase refrigerant strongly influences each other, so the pressure balance among parallel refrigerant circuits is carried out by adjusting the mass flow rate of refrigerant in each circuit. The distinguishing feature of this model is that it performs a node-to-node discretized analysis of the condenser along each circuit, making fewer assumption about the nature of heat transfer and pressure drop than traditional models. The model has been validated against experimental data on such coils available in the literature. It is not only helpful for optimal design of air-cooled condenser with any kind of complex circuiting arrangement, but also can act as a main part of the simulation model of refrigeration and heat pump systems.

Research on the Integrated Control System of a Small Marine Condenser

Internal Model Control of Internal Thermally Coupled Air Separation Column

Subcooling Control Method for the Adjustable Ejector in the Direct Expansion Solar Assisted Ejector-Compression Heat Pump Water Heater

Oil temperature control of large hydraulic system

Research progress of control of condensate depression for condenser

Optimization of Control Scheme for Large Flow Seawater Cooling System Based on FloMaster-Simulink Co-Simulation

STUDY ON THE SIMULATION OF THE LOAD CONTROL FOR THE MARINE CURRENT ENERGY POWER SYSTEM

Optimum Control Strategy and Performance Simulation of a Constant Temperature and Humidity Air-conditioning System

DESIGN AND PERFORMANCE SIMULATION ON A NOVEL COMBI-SYSTEM WITH CONTINUOUS SOLAR SOLID ADSORPTION REFRIGERATION AND HEATING

Multi-Objective Constructal Optimization for Marine Condensers

Modeling of a Condenser in Dynamic Operation Using Comsol Multiphysics Software

A universal simulation model of air-cooled condenser consisting of plate-fin-tube

Modeling of Separate Meter in and Separate Meter out Control System

Simulation Of Separate Meter In And Separate Meter Out Control Of Electro Hydraulic Load Sensing System

Investigation of Monitor- And- Control Software of Marine Refrigerated Container

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

Design and simulation of fuzzy control system for water temperature of Heat exchanger

Simplified Thermal Model and Optimal Control for Chilled Water Pipe in Air-Conditioning System

INTEGRATED STEADY-STATE AND DYNAMIC SIMULATION OF MULTI-UNIT AIR CONDITIONERS BASED ON TWO-PHASE FLUID NETWORK MODEL

Study on the optimal control strategy for condensing side of chiller systems

Thermodynamic process control of compression-assisted absorption refrigeration using ocean thermal energy