Research on the effect of phenol amine catalyst HP-30 to the structure and property of PU rigid foams

JIANG Wen-jun,YAO Qi-sheng,FAN Zhong-yong,HOU Yi-bin,LU Qi-ting

DOI: https://doi.org/10.3969/j.issn.1001-9731.2013.16.010

2013-01-01

Abstract:In this work, the 60 kg/m3 PU rigid foam with high compression performance has been successfully prepared with polyether polyol GR-835G and polymethylene polyphenylisocyanate PM-200 as main raw materials, phenol amine catalyst HP-30 as the catalyst, and H2O as the blowing agent. The results show that, HP-30 can play important roles as not only the trimerization catalyst, but also the blowing agent. The cream time, rise time and gel time of the foaming systems, become shorter with more HP-30, while the apparent densities of the foams have a trend with bigger then smaller, and bigger finally. The H2O dosages need be changed for maintaining the same apparent density with the increase of the HP-30 dosages. However, there was almost no effect to the foaming time and the voscosity of the foaming system with H2O dosage changed under 6wt%. The compression properties of 60 kg/m3 foams can be improved with the HP-30 dosages increased. When the HP-30 dosage is 13pphp, the compressive strength and compressive modulus of the PU rigid foam are 0.772 MPa, 30.0 MPa, respectively. In addition, the possible mechanism of HP-30 has also been disscussed.