Abstract:Weak magnetic nondestructive testing (e.g., metal magnetic memory method) concerns the magnetization variation of ferromagnetic materials due to its applied load and a weak magnetic surrounding them. One key issue on these nondestructive technologies is the magnetomechanical effect for quantitative evaluation of magnetization state from stress–strain condition. A representative phenomenological model has been proposed to explain the magnetomechanical effect by Jiles in 1995. However, the Jiles' model has some deficiencies in quantification, for instance, there is a visible difference between theoretical prediction and experimental measurements on stress–magnetization curve, especially in the compression case. Based on the thermodynamic relations and the approach law of irreversible magnetization, a nonlinear coupled model is proposed to improve the quantitative evaluation of the magnetomechanical effect. Excellent agreement has been achieved between the predictions from the present model and previous experimental results. In comparison with Jiles' model, the prediction accuracy is improved greatly by the present model, particularly for the compression case. A detailed study has also been performed to reveal the effects of initial magnetization status, cyclic loading, and demagnetization factor on the magnetomechanical effect. Our theoretical model reveals that the stable weak magnetic signals of nondestructive testing after multiple cyclic loads are attributed to the first few cycles eliminating most of the irreversible magnetization. Remarkably, the existence of demagnetization field can weaken magnetomechanical effect, therefore, significantly reduces the testing capability. This theoretical model can be adopted to quantitatively analyze magnetic memory signals, and then can be applied in weak magnetic nondestructive testing.

Nonlinear Magnetic Error Evaluation of a Two-Mode Watt Balance Experiment

A nonlinearity in permanent-magnet systems used in watt balances

Study of Differential Magnet-moving Type Velocity Sensor

Study of Nonlinear Excitation Circuits for Fluxgate Magnetometer

Coil Motion Effects in Watt Balances: a Theoretical Check

An Analytical Algorithm for 3D Magnetic Field Mapping of a Watt Balance Magnet

An Investigation of Magnetic Hysteresis Error in Kibble Balances

A Discussion Ofblconservation on a Two Dimensional Magnetic Field Plane in Watt Balances

Coils and the Electromagnet Used in the Joule Balance at the NIM

Analytical Model of Electromagnetic Performance for Permanent-Magnet Vernier Machines Using Nonlinear Exact Conformal Model

Nonlinear Analytical Model of Heteropolar Radial Magnetic Bearing

A Method Based on Measured Boundary Conditions for Reconstructing the Magnetic Field Distribution of an Electromagnetic Mechatronic System

Designing Model and Optimization of the Permanent Magnet for Joule Balance NIM-2

Two Simple Modifications to Improve the Magnetic Field Profile in Radial Magnetic Systems

Nonlinear Analytical Modelling for Surface-Mounted Permanent Magnet Motors with Magnet Defect Fault

The Interaction Between the Magnetized Coil-Suspension System and the Compensation Coil in the Joule Balance

Field representation of a watt balance magnet by partial profile measurements

Magnetization Effect in Kibble Balance Measurement

Harmonic balance applied to a 2D nonlinear finite‐element magnetic model with motion and circuit coupling

A Non-Linear Permanent Magnet Working Point Migration Model and Its Application to Simulation of a Polarized Magnetic System

A General Nonlinear Magnetomechanical Model for Ferromagnetic Materials under A Constant Weak Magnetic Field