Abstract:In this paper, a simplified thermodynamics analysis of cyclic plastic deformation is performed in order to establish an energy transition relation for describing the elastic–plastic stress and strain behavior of the notch-tip material element in bodies subjected to multiaxial cyclic loads. Based on the thermodynamics analysis, it is deduced that in the case of elastic–plastic deformation, Neuber’s rule inevitably overestimates the actual stress and strain at the notch tip, while the equivalent strain energy density (ESED) method tends to underestimate the actual notch-tip stress and strain. According to the actual energy conversion occurring in the notch-tip material element during cyclic plastic deformation, a unified expression for estimating the elastic–plastic notch stress–strain responses in bodies subjected to multiaxial cyclic loads is developed, of which Neuber’s rule and the ESED method become two particular cases, i.e. upper and lower bound limits of the notch stress and strain estimations. This expression is verified experimentally under both proportional and non-proportional multiaxial cyclic loads and a good agreement between the calculated and the measured notch strains has been achieved. It is also shown that in the case of multiaxial cyclic loading, the unified expression distinctly improves the accuracy of the notch-tip stress–strain estimations in comparison with Neuber’s rule and the ESED method. The unified expression of the notch stress–strain calculation developed in this paper can thus provide a more logical approximate approach for estimating the elastic–plastic notch-tip stress and strain responses of components subjected to lengthy multiaxial cyclic loading histories for local strain approach-based fatigue-crack-initiation life prediction.

RESEARCH ON CHARACTERISTIC VALUES OF NOTCHED PLANE PROBLEM OF ORTHOTROPIC MATERIALS

ANALYSIS OF PLANE NOTCH PROBLEMS WITH ANALYTICAL TRIAL FUNCTIONS' METHOD

Plane strain and three-dimensional analyses for thermo-mechanical behavior of multilayered transversely isotropic materials

The Unified Characteristic Theory for Plastic Plane Stress Problems

A Unified Characteristic Theory for Plastic Plane Stress and Strain Problems

A unified expression of elastic-plastic notch stress-strain calculation in bodies subjected to multiaxial cyclic loading

Unified Characteristics Line Theory of Spacial Axisymmetric Plastic Problem

Investigation on Fatigue Strength and Notch Effect of 17-4PH Blade Root

Sub-region Mixed Finite Element Analysis of V-notched Plates

Complete Eigen-Solutions for Plane Notches with Multi-Materials by the Imbedding Method

Complete eigen-solutions for anti-plane notches with multi-materials by super-inverse iteration

Complete elastic–plastic stress asymptotic solutions near general plane V-notch tips

Sub-Region Mixed FEM for Calculating Stress Intensity Factor of Antiplane Notch in Bi-Material

Plane Stress Sharp V-notch Tip Field in Power-Law Creeping Solids

Determination of Asymptotic Field Coefficients for V-notches by the Weak Form Quadrature Element Method

Sub-Region Mixed Element Ii-V-Notch Problem

An Analytical Approach for the Near‐Tip Field Around V‐Notch in Orthotropic Materials

Semi-empirical formulas on notch stress field and SIF of orthotropic V-shaped thin plate with initial crack under tensile-bending loads

Evaluation of heat flux intensity factor for a V-notched structure by the isogeometric boundary element method

High-Performance Geometric Nonlinear Analysis With The Unsymmetric 4-Node, 8-Dof Plane Element Us-Atfq4

Notch effect of welded joints subjected to antiplane shear loading