Abstract:The influence of pulp carryover on the efficiency of the xylanase (X) treatment of industrial unbleached and oxygen-delignified eucalypt kraft pulps (A1 and A2 pulps, with kappa number (KN) values of 16 and 10, respectively), collected at the same pulp mill, was studied regarding the consumption of bleaching chemicals and pulp bleachability. Another non-oxygen-delignified eucalyptus kraft pulp of KN 13 was received after the extended cooking from a different pulp mill (pulp B). The assays were performed with both lab-washed (carryover-free) and unwashed (carryover-rich) pulps. Both lab-washed and unwashed pulps with carryover were subjected to X treatment, the former being demonstrating considerably higher ClO 2 savings than the pulps containing carryover. The savings of bleaching reagents were higher when the X stage was applied to the A1 pulp than to the A2 pulp. This advantage of A1 pulp, however, was not confirmed when using unwashed pulps. In contrast, the gains obtained from the X treatment of unwashed pulp A2 were practically as high as those observed for the lab-washed A2 pulp. Furthermore, a similar effect in X stage was recorded for unwashed pulps having close KN: oxygen-delignified A2 pulp and non-oxygen-delignified B pulp. The results suggest that pulp carryover and initial pH were the key factors relating to the effectiveness of X treatment. The application of X treatment to the A2 unwashed pulp (after the oxygen stage) not only saved 20% of the ClO 2 and 10% of the sodium hydroxide, but also improved the brightness stability of the bleached pulp without affecting its papermaking properties.

Study on Xylanase-Aided Bleaching of Wheat Straw KP

A study on modification of chemi-mechanical pulping property of wheat straw by pretreatment with ZnCl2aqueous solution

Modification on the Chemi-mechanical Pulping Property of Rice Straw with Alkali-urea System

Research On Cotton Stalk Pulping With Alkaline Peroxide Extruding Pulp

Alkaline Peroxide Extrusion Pulping of Cotton Bast and Cotton Stalk

The Effects of NaOH-Urea Aqueous Solution on the Strength and Softness Properties of Bamboo Ligno-cellulosic Fibers

Oxygen Delignification of Kraft Pulp of Whole Stalk Kenaf

Comparative study on the mild pretreatment processes for enzymatic hydrolysis of wheat straw with high-solid loading

Valorisation of wheat straw into paper with improved quality characteristics using ultrafiltered xylano-pectinolytic pulping approach

Research on enzyme pretreatment of polylactic acid/cotton blended fabric under ultrasonic wave

Optimization of Enzymatic Hydrolysis of Wheat Straw Pretreated by Alkaline Peroxide Using Response Surface Methodology

Application of Ultrasonic Technology in the Enzyme Pretreatment of PLA Fabric

An environment-benign approach of bamboo pulp bleaching using extracellular xylanase of strain Bacillus stratosphericus EB-11 isolated from elephant dung

One bath pretreatment of PLA/Richcel/bamboo fiber blended fabric

Pretreatment Process of Polylactic Acid / Richcel / Bamboo Fiber Blended Fabric

Effects of two different enzyme treatments on the microstructure of outer surface of wheat straw

Xylanase treatment of eucalypt kraft pulps: effect of carryover

Pozone Technology to Bleach Pulp

Enhancement of Enzymatic Hydrolysis of Wheat Straw by Gamma Irradiation–alkaline Pretreatment

Evaluation of oxy-organosolv pretreatment on lignin extraction from wheat straw

Pretreatment of Wheat Straw by Γ-Ray Radiation and Alkali Solution