Abstract:Herein, a novel in-plane dual-axis micro-electro-mechanical system piezoresistive accelerometer was proposed based on theoretical and simulation analyses. Its self-support piezoresistive beam (SPB) possessed the features of force amplification and axial deformation to obtain high sensitivity. To clarify the influence of structural dimensions on the performance of the accelerometer and the pure axial-deformation condition of the SPB, a theoretical model was established to analyze mechanical behavior. The theoretical results were in well accordance with the simulation ones, displaying a maximum relative error of less than 10%. The theoretical and simulation results suggested that the accelerometer with thin and long support/hinge beams possesses a higher sensitivity but a lower frequency. However, the sensitivity and natural frequency increased simultaneously before the distance between SPB and support beam $D$ reached a certain value. The simulated longitudinal stress of SPB achieved the average value of 32.473 MPa, and the first-order natural frequency was nearly 13.6 kHz. Furthermore, the fabricated accelerometer was tested in a simple packaging case. The experimental results demonstrated that the proposed accelerometer had a measuring sensitivity of 0.198 mV/g/V with a maximum non-linearity of 1.00% FS and a resonant frequency of 12.93 kHz. The cross sensitivities were 11.93 and $15.97~\mu \text{V}$ /g/5V in the $y$ and $z$ axes, respectively, which were 1.21% and 1.61% of the prime-axis sensitivity. The zero offset with varying temperatures was 0.00296%/°C, and the zero drift in the long-term static stability test was 0.02 mV. All the results above revealed the promising application potential of the proposed accelerometer in vibration detection in the high-speed rotating spindle of machine tools. [2022-0057]

Multi-Flexure Piezoresistive Accelerometer for Vibration Detection

A High-Performance Multi-Beam Microaccelerometer for Vibration Monitoring in Intelligent Manufacturing Equipment

Design & Fabrication of a MEMS Piezoresistive Accelerometer with Beam-Film Combined Structure

A piezoresistive micro-accelerometer with high frequency response and low transverse effect

A Novel Tri-Axial Piezoelectric MEMS Accelerometer with Folded Beams

A Two-Axis MEMS Piezoresistive In-Plane Accelerometer with Pure Axially Deformed Microbeams

MEMS high-frequency accelerometers for mechanical fault monitoring

Design and Measurement of a Piezoresistive Triaxial Accelerometer Based on MEMS Technology

Incorporation of the Stress Concentration Slots into the Flexures for A High-Performance Microaccelerometer

MEMS Accelerometer With Two Thin Film Piezoelectric Read-Out

Development of a MEMS Piezoresistive High-g Accelerometer with a Cross-Center Block Structure and Reliable Electrode

Design of a Beam-Membrane Piezoresistive Accelerometer Based on MEMS Technology

Development of A Novel Two Axis Piezoresistive Micro Accelerometer Based on Silicon

Design of a Piezoelectric Accelerometer with High Sensitivity and Low Transverse Effect

Monolithically Integrated Triaxial High-Performance Micro Accelerometers with Position-Independent Pure Axial Stressed Piezoresistive Beams

An Integrated Mems Piezoresistive Tri-Axis Accelerometer

High Sensitivity MEMS Accelerometer Using PZT-Based Four L-Shaped Beam Structure

A High-Performance Micromachined Piezoresistive Accelerometer with Axially Stressed Tiny Beams

Modeling and Characterization of a Novel In-Plane Dual-Axis MEMS Accelerometer Based on Self-Support Piezoresistive Beam

Piezoresistive Micro-Accelerometer with Supplement Structure.

Optimization Design of MEMS Piezoresistive Acceleration Sensor