Abstract:To explore the mechanism and efficiency of ammonia nitrogen removal, a pilot-scale biofilter for the simultaneous removal of high concentrations of iron, manganese, and ammonia nitrogen[Fe(Ⅱ) 11.9-14.8 mg·L-1, Mn(Ⅱ) 1.1-1.5mg·L-1, and NH4+-N 1.1-3.2 mg·L-1] from low temperature(5-6℃) groundwater was operated in a water supply plant in Northeast China. Results indicated excellent performance for ammonia nitrogen removal during the initial start-up stage. According to theoretical analysis and experimental verification, TNloss was driven by the adsorption of ammonia nitrogen by iron oxides, and the conversion of ammonia nitrogen into nitrate nitrogen occurred via biological nitrification. When the concentration of ammonia nitrogen increased, due to limited adsorption sites, the adsorption capacity of iron oxides remained stable at approximately 1 mg·L-1. For the same period, the amount of ammonia nitrogen removal via oxidation continued to increase, with higher quantities removed in the upper filter layer than in the lower filter layer. Dissolved oxygen(DO) is the limiting factor in the further increase in the removal of ammonia nitrogen by oxidation. With an increase in the filtration rate, the adsorption time of ammonia nitrogen by iron oxides was shortened, and the adsorption amount was reduced. Meanwhile, the shortening of EBCT reduced the ammonia nitrogen removed by nitrification under the action of nitrifying bacteria in the unit volume of the filter material. Based on these findings, it is recommended that the thickness of the filter layer should be increased to improve ammonia nitrogen removal performance.

Rapid Start-Up of Biological Purifying Filter of Groundwater Containing High Concentration of Iron and Manganese Associated Ammonia Nitrogen

Rapid Start-Up of Biofilter for Removal of Iron and Manganese from Groundwater

Two-stage Purification of Groundwater Containing High Concentration of Iron, Manganese and Ammonia Nitrogen

Start-Up of a Biofilter in a Full-Scale Groundwater Treatment Plant for Iron and Manganese Removal

Operational Parameters Required for the Start-Up Process of a Biofilter to Remove Fe, Mn, and NH3-N from Low-Temperature Groundwater

Accelerated startup of full-scale drinking water biofilters using mature media: Insights into microbial communities and manganese oxide coating

Simultaneous Removal of Iron, Manganese and Ammonia from Groundwater: Upgrading of Waterworks in Northeast China

Effective Start-Up Biofiltration Method for Fe, Mn, and Ammonia Removal and Bacterial Community Analysis.

Removal of iron, manganese and high ammonia from groundwater by biofilter

[Removal Efficiency and Mechanism of Ammonia Nitrogen in a Low Temperature Groundwater Purification Process].

Effect offilter of single packing and uneven double material oniron and manganese removal for groundwater

Interactions Between Ammonia, Iron and Manganese Removal Using Pilot-Scale Biofilters

Distribution and Genetic Diversity of Microbial Populations in the Pilot-Scale Biofilter for Simultaneous Removal of Ammonia, Iron and Manganese from Real Groundwater.

Biological Removal of High-concentration Fe and Mn from Micro-polluted Groundwater Using a Single Filter

Biological Removal of High-concentration Fe, Mn and NH4+ -N from Groundwater Using Single Filter

Application of Biological Process to Treat the Groundwater with High Concentration of Iron and Manganese

Evolution of Biogenic Fe-Mn Binary Oxide Physicochemical Properties During Biofilter Start-Up for Sustainable Urban Groundwater Treatment

Rapid start-up of the biofilter for simultaneous manganese and ammonia removal at low temperature: Effects of phosphate and copper

[Factors Affecting Biological Removal of Iron and Manganese in Groundwater].

Performance and microbial community profiles in pilot-scale biofilter for the simultaneous removal of ammonia, iron and manganese at different manganese concentrations

Research Progress on Quick Start-Up of Filter for Manganese Removal from Groundwater