Abstract:Aeration followed by rapid sand filtration is a common method in drinking water treatment to remove iron (Fe) and manganese (Mn) from anoxic groundwater. To ensure the successful removal of Fe and Mn within a single filter, several factors such as raw water characteristics, backwash procedures and chemical and microbial interactions with the filter medium need to be considered. Here, we assess the characteristics of a single medium rapid sand filter with highly efficient removal of Fe and Mn. Using synchrotron X-ray spectroscopy, we show that formation of ferrihydrite-type Fe oxides in the top of the filter (0–50 cm) accounts for >95 % of the removal of dissolved Fe 2+ in the filter. Birnessite-type Mn- oxides, which are thought to be biogenic, form over a wider depth interval (0–110 cm). Results of 16 S rRNA gene amplicon sequencing indicate a corresponding distinct vertical stratification of the microbial community, with potential iron-oxidizing Gallionella , Leptothrix and Sideroxydans dominating in the upper part of the filter, and nitrifiers being more prevalent deeper in the filter. Besides Fe and Mn-oxide, Fe-flocs and bacteriological hollow sheets form in the upper part of the filter. Both the Fe-flocs, hollow Fe-sheets and part of the Fe and Mn coatings are removed through backwashing, thereby reducing the pressure difference measured over the filter medium linked to clogging of pores (from 14 kPa to 1.5 kPa) and ensuring continued water flow. Backwashing removes part of the Gallionella , but this does not negatively impact the filter performance. Strikingly, SEM imaging with EDS mapping revealed alternating layers of Fe and Mn-oxides on the coated grains throughout the filter. This indicates slow mixing of the filter medium between the upper 30 cm and the rest of the filter during backwashing. Slow mixing likely contributes to continued success of the filter by ensuring homogeneous filter bed growth, while still allowing for stratification of the microbial community.

Rapid Start-Up of Biofilter for Removal of Iron and Manganese from Groundwater

Accelerated startup of full-scale drinking water biofilters using mature media: Insights into microbial communities and manganese oxide coating

Rapid Start-Up of Biological Purifying Filter of Groundwater Containing High Concentration of Iron and Manganese Associated Ammonia Nitrogen

Start-Up of a Biofilter in a Full-Scale Groundwater Treatment Plant for Iron and Manganese Removal

Evolution of Biogenic Fe-Mn Binary Oxide Physicochemical Properties During Biofilter Start-Up for Sustainable Urban Groundwater Treatment

Research Progress on Quick Start-Up of Filter for Manganese Removal from Groundwater

Manganese removal processes during start-up of inoculated and non-inoculated drinking water biofilters

Start-up Evaluations and Biocarriers Transfer from a Trickling Filter to a Moving Bed Bioreactor for Synthetic Mariculture Wastewater Treatment.

Operational Parameters Required for the Start-Up Process of a Biofilter to Remove Fe, Mn, and NH3-N from Low-Temperature Groundwater

Effective Start-Up Biofiltration Method for Fe, Mn, and Ammonia Removal and Bacterial Community Analysis.

Biological Removal of High-concentration Fe and Mn from Micro-polluted Groundwater Using a Single Filter

Acceleration of Sand Filtration Start-Up for Manganese-Containing Groundwater Treatment: Microbial-Mediated Autocatalytic Oxidation of Manganese Oxides

Ozone Pre-Oxidation to Accelerate the Ripening of Manganese Oxides Filter for Efficient Manganese Removal from Drinking Water

Rapid start-up of the biofilter for simultaneous manganese and ammonia removal at low temperature: Effects of phosphate and copper

Efficient chemical and microbial removal of iron and manganese in a rapid sand filter and impact of regular backwash

[Factors Affecting Biological Removal of Iron and Manganese in Groundwater].

Two-stage Purification of Groundwater Containing High Concentration of Iron, Manganese and Ammonia Nitrogen

Treatment of groundwater containing Mn(II), Fe(II), As(III) and Sb(III) by bioaugmented quartz-sand filters

Distribution and genetic diversity of the microorganisms in the biofilter for the simultaneous removal of arsenic, iron and manganese from simulated groundwater.

Removal of iron, manganese and high ammonia from groundwater by biofilter

Performance and microbial community profiles in pilot-scale biofilter for the simultaneous removal of ammonia, iron and manganese at different manganese concentrations