Abstract:The porous TiC ceramics with different porosity were fabricated by hot-press sintering using CaO as pore-forming agent, which opened a new field to explore pore ceramics. Then a serious of porous TiC were fabricated and investigated the microstructure, porosity and mechanical properties of pore TiC. The porosity and bulk density of TiC depend on CaO content, which significantly affects the microstructure, mechanical properties and fracture behaviors. With the CaO content increasing, the porosity and pore size of TiC are increased, while the bulk density is decreased. Compressive strength and specific compressive strength exhibit a trend of monotone variation, and the maximum compressive strength is 51.3 MPa when CaO content is 40 vol%. A high porosity condition leads to a loose structure with low load-bearing capacity. As CaO content increases from 40vol% to 55vol%, porosity of TiC increases from 32.9 to 52.6%, and the compressive strength of porous TiC decreases from 51.3 MPa to 9.7 MPa. Additionally, it was concluded that porosity determine the bulk density and strength of porous TiC. However, the thermal conductivity of pore TiC increases with rising of porosity. This is attributed to the total number of pores is decrease owing to CaO agglomeration.

Mechanical Properties of Porous Tio2 Ceramics Fabricated by Freeze Casting Process

Fabrication and Mechanical Properties of Porous Tib2 Ceramic

Effects of pore microstructures on thermal and mechanical properties of porous TiC fabricated by hot press sintering

Microstructures and Properties of Porous TiAl-based Intermetallics Prepared by Freeze-Casting

Lamellar Structure/processing Relationships and Compressive Properties of Porous Ti6Al4V Alloys Fabricated by Freeze Casting.

Lamellar BaTiO 3 and its composites fabricated by the freeze casting technique

Pore Architectures And Mechanical Properties Of Porous -Sialon Ceramics Fabricated Via Unidirectional Freeze Casting Based On Camphene-Templating

High-Strength Porous Titanium Diboride Ceramics: Microstructure and Mechanical Properties

Influence of Titanium Dioxide on the Microstructure and Properties of Porous Cordierite Ceramics

Pore Architectures and Mechanical Properties of Porous α-SiAlON Ceramics Fabricated via Unidirectional Freeze Casting Based on Camphene-Templating

Synthesis of Porous α-Al_2O_3 Ceramics by Freeze-Casting Processing

Highly Porous Zro2 Ceramics Fabricated by A Camphene-Based Freeze-Casting Route: Microstructure and Properties

Study on Microstructures and Properties of Porous TiC Ceramics Fabricated by Powder Metallurgy

Pore Structure and Compression Behavior of Porous TiAl Alloys by Freeze Casting

Microstructure and mechanical properties of directionally ordered porous Ti3SiC2 prepared using freeze casting

Fabrication of Ceramics with Complex Porous Structures by the Impregnate–Freeze‐Casting Process

Alumina Porous Ceramics Obtained by Freeze Casting: Structure and Mechanical Behaviour under Compression

Microstructure and Mechanical Properties of Porous Ti3sic2

Porous TiN Ceramics Fabricated by Carbothermal Reduction Method

Porous NiCu alloy with tailored pore structure and mechanical property fabricated by freezing casting

Fabrication and compressive properties of directional porous titanium scaffold by freeze casting TiH2 powders