Abstract:The gradation and mechanical properties of aggregates impressively affect the load carrying capacity and rutting resistance of asphalt mixtures. They are able to provide some fundamental parameters that are linked to mixture performance. In order to accurately detect critical controlled sizes and obtain more fundamental parameters that can characterize load carrying capacity and rutting resistance of asphalt mixtures, this paper aims to develop a mechanics-based approach to evaluate aggregate gradation, which contains the theoretical packing analysis and discrete element simulation. An extended theoretical morphology framework is developed by checking the local and global interlock of graded aggregates in the theoretical packing analysis. The sieve size range of primary structure which has an interactive interlock can be determined in the local interlock check model. The relationship between the transferred force and the induced force is proposed in the densest and loosest packing arrangements, respectively. The morphological parameters of disruption factor and weighted average size for the global scale are also proposed in theoretical packing analysis. Then the discrete element method is used to validate the theoretical framework. The advanced gradation input algorithm procedure is established in the discrete element simulation to simulate the compression test of graded aggregates. The mechanical parameters of contact force, contact points and stress-strain curves are extracted from the simulation results. The results show that the discrete element method can validate the theoretical framework and output the performance related parameters. The contact force analysis shows that the aggregates retaining on sieve sizes of 2.36 and 4.75 mm provide more than 50% contribution to resist load, and the aggregates retaining on sieve sizes of 1.18, 0.6 and 0.3 mm provide more than 50% contribution to stabilize the structure. The coordination number analysis suggests that the gradation with more fine aggregates might lead to a greater number of voids but smaller air-void size when the asphalt content and porosity remain constant. The stress-strain curve analysis shows that the modulus and secondary strain are highly related to the rutting performance of an asphalt mixture. (C) 2019 Elsevier Ltd. All rights reserved.

Analysis of Increase Reason on AC-13 Asphalt Mixtures Voids

Analysis on gradation of AC-16 asphalt mix with Superpave design method

Effects of Air Void Content on Asphalt Mixture Performance

A Study on Effect of Coarse and Fine Aggregate on Asphalt Mixture Homogeneity

Mechanical Evaluation of Aggregate Gradation to Characterize Load Carrying Capacity and Rutting Resistance of Asphalt Mixtures

Effects of Asphalt-Aggregate Ratios and Compaction Efforts on Horizontal Aggregate Homogeneity in Asphalt Mixtures

Study on Low Noise Asphalt Pavement Mixture Design

Research on Influence of Aggregate Gradation on the Performance of Porous Asphalt Pavement

Evaluation of Compaction Characteristics of Asphalt Mixture under Different Compaction Effects

Factors affecting splitting strength of asphalt mixture

Influence of gradation on volume characteristics and engineering performance of asphalt mixture

Principle analysis of the mix design and performance evaluation of the asphalt-filler volume equivalent substitution method

Experimental Research on Gradation Range and Performance of SMAC13

Study on Compaction Properties and Skeleton Structural Characteristics of Porous Asphalt Mixture

Effect of Aggregate Gradation and Morphology on Porous Asphalt Mixture Performance

Air voids distribution of asphalt mixtures in different compaction methods and aggregate gradations

Experimental Study on Permeability Characteristic of Asphalt Mixture

Statistical Analysis of the Asphalt Mixtures Volumetric Properties

Analysis of the Ratio of Coarse Aggregate to Porous Asphalt Mixture

Investigation of Fracture Failure and Water Damage Behavior of Asphalt Mixtures and Their Correlation with Asphalt-Aggregate Bonding Performance

Laboratory Evaluation of a Vertical Vibration Testing Method for an SMA-13 Mixture